INCH-POUND
MIL-DTL-17124F
17 July 2012
SUPERSEDING
MIL-DTL-17124E
06 March 2001
DETAIL SPECIFICATION
CORD, DETONATING and DUMMY CORD, DETONATING
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification describes the requirements, examinations and tests for
the following items: Cord, Detonating and Dummy Cord, Detonating.
1.2 Classification. The detonating cords covered by this specification are classified into
the following types and classes as specified (see 13042072).
Type I contains PETN as major component of explosive core.
Type II - contains RDX as major component of explosive core.
Type III- contains inert powder as a major component of inert core.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4
of this specification. This section does not include documents in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to:
Commander, US Army ARDEC, Attn: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or emailed to ardecstdzn@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil.
AMSC N/A
FSC: 1375
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business