INCH-POUND
MIL-DTL-46550D(AR)
11 September 2011
SUPERSEDING
MIL-C-46550C(AR)
w/AMENDMENT 1
14 July 1989
DETAIL SPECIFICATION
CHARGE, DEMOLITION, SHAPED, 40 LB.
M3A1, METAL PARTS ASSEMBLY
This specification is approved for use by U.S. Army Armament Research, Development and
Engineering Center (ARDEC) and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the parts and assemblies for one type of demolition
kit designated as Charge, Demolition, Shaped, 40 lb., M3A1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those specified in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to : Commander
ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or emailed to
aredecstdzn@conus.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1375
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business