INCH-POUND
MIL-DTL-50911B
7 January 2011
SUPERCEDING
MIL-P-50911A (AR)
19 March 1983
DETAIL SPECIFICATION
PRIMING ASSEMBLY FOR DEMOLITION CHARGE ASSEMBLY:
M183 PARTS FOR AND LOADING, ASSEMBLING AND PACKING
Reactive after 7 January 2011 and may be use for new design and
existing design and acquisition
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification prescribes the requirements and identifies the verification
methods for the Priming Assembly for Demolition Charge Assembly: M183 Parts For and
Loading, Assembling and Packing.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Commander,
U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or e-
mailed to ardecstdzn@conus.army.mil. Since contact information can change, you may want to
verify the currency of this information using ASSIST Online database at
AMSC N/A
FSC 1375
Distribution Statement A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business