Demolition Materials - FSC 1375

JAN-A-289 - Aluminum Powder, Flaked, Grained And Atomized (S/S By Mil-A-512)

JAN-F-321 - Firing-Devices, Pressure-Type, M-1A1

JAN-F-360 - Fuse, Blasting, Time

JAN-F-361 - Firing-Devices, Pressure-Release-Type, M-5

JAN-F-364 - Firing-Devices, Pull-Friction-Type, M-2

JAN-P-381 - Powder, Propellent, 4.2-Inch Chemical Mortar (S/S By Mil-I-60016)

JAN-P-540 - Power, Fuze (S/S By Mil-P-663)

JAN-P-659 - Powder, Propellent, M7

JAN-P-774 - Powder, Propellent, For Small Arms Ammunition, Caliber .60.

JAN-S-415 - Pin, Lock (Hitch Pin)

JAN-S-445 - Snake, Demolition, M-3

JAN-T-234 - Trinitrotoluene (Tnt), Block

MIL-A-23684 - Actuator, Explosive, Mark 12 Mod 0

MIL-A-374 - Adhesive, Paste, For Demolition Charges

MIL-A-46545 - Actuator Explosive, Linear, M2 Parts For

This specification covers the quality assurance provisions for the component parts for one type of electrically actuated, gas operated power source designated as Actuator, Explosive, Linear, M2.

MIL-A-46556 - Actuator, Explosive, Linear, M2 Loading, Assembling, And Packing

This specification covers the quality assurance provisions, and special requirements not covered by the drawings, for the loading, assembling and packing of one type of electrically actuated, gas operated power source designated as Actuator, Explosive, Linear, M2.

MIL-A-46655 - Attachments, Tow And Push For Demolition Kit, Projected Charge, Parts For And Packing

This specification covers special requirements not covered by the drawings and quality assurance provisions for fabrication of handling and positioning equipment designated as Tow and Push Attachments for use with Demolition Kit, Projected Charge, M157.

MIL-A-46687 - Actuator, Explosive, T2Es Loading, Assembling And Packing

MIL-A-60091 - Adhesive For Bonding Demolition Charges To Structural Surfaces

This specification covers a one-part, ready to use adhesive, suitable for use in bonding demolition charges to dry, wet and underwater surfaces of all types of structural materials, under all weather conditions.

MIL-A-63109 - Antenna For Xm122 Firing Device Transmitter

This specification contains requirements not covered by the drawing and provides quality accurance provisions for the fabrication and packing of the antenna used for the XM122 firing device transmitter assembly.

MIL-A-63117 - Amplifier, Hybrid, Radio Frequency For Xm122 Firing Device Receiver

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of hybrid radio frequency amplifier for the XM122 firing device receiver.

MIL-B-11211 - Burster, Bomb, M29

MIL-B-11596 - Base Coupling, Firing Device, Non-Metallic, M2, Loading, Assembling And Packing

This specification covers the loading, assembling and packing for Base Coupling, M2 for use with firing devices.

MIL-B-11597 - Block, Demolition, M5, Inert

MIL-B-12719 - Bag, Canvas, Carrying For Demolition Equipment

This specification covers a canvas bag for use in carrying Demolition Equipment.

MIL-B-13230 - Cartridge, Cluster Ejection, M3

MIL-B-13412 - Block, Demolition, Chain, M1, Inert

MIL-B-13872 - Box, Containers, For Non-Electric Blasting Caps

This specification covers two containers of different sizes and materials used for transport of blasting caps in the field.

MIL-B-20397 - Block, Demolition, M3

MIL-B-20490 - Burster, M7, Loading, Assembling, And Packing

MIL-B-20579 - Blocks, Demolition, M1 And M2

MIL-B-22069 - Booster, Mark 30 Mod 0

MIL-B-45451 - Benite Strands

This specification covers benite strands for use in ammunition.

MIL-B-50451 - Blasting Machine, M32 Parts And Assembly

This specification covers the parts and assembly for one type of blasting machine designated as Blasting Machine, M32.

MIL-B-50474 - Blasting Agent - Tnt

This specification covers a type of spherical Trinitrotoluene (TNT) which is water-proof free-flowing explosive used for quarrying and/or supplementing large diameter canned or cartridged charges.

MIL-B-60023 - Bag Assembly, For Charge Demolition, Block, M5A1 And Charge Assembly, Demolition, M183

This specification covers the fabrication and parts of a bag assembly for use in carrying, Charge, Demolition Blocks, M5A1 and Demolition charge, M183, Assemblies.

MIL-B-60410 - Blasting Machine, Handle Operated, Metal Case 10 Cap Capacity

This specification covers the quality assurance provisions and special requirements for a blasting machine (hand operated generator) used for detonating electric blasting caps or electric squibs.

MIL-B-624 - Barium Carbonate (For Use In Ammunition)

This specification covers barium carbonate for use in ammunition.

MIL-B-63094 - Blasting Machine, 50 Cap, M34

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication inspection, test and packing for a generator blasting machine designated as the Blasting Machine, M34.

MIL-B-63116 - Battery, Dry For Xm122 Firing Device

This specification covers quality assurance provisions and preparation for delivery for one type of battery for the M122 Firing Device Transmitter.

MIL-B-63369 - Booster Assembly, Inert For Demolition Kit Cratering, Training, Xm270 Parts For, Loading, Assembling And Packing

This specification contains the parts, loading assembly, and packing for one type of Inert Booster Assembly for one type of rocket motor assembly designated as Rocket Motor for Demolition Kit, Cratering, Training, XM270.

MIL-B-9806 - Battery Power Supply Mau-17/E

MIL-C-0010244 - Cryptographic Equipment Destroyer, Incendiary, Th4, M2A1

This specification covers one type of equipment destroyer.

MIL-C-0014003 - Caps, Blasting, Special

This specification covers special blasting caps for use in detonating various types of explosives.

MIL-C-10244 - Cryptographic Equipment Destroyer, Incendiary, Th4, M2A1

This specification covers one type of equipment destroyer.

MIL-C-10378 - Cartridge, Catapult, M28 And M30, Assembly, Marking, And Packing

MIL-C-10592 - Cap, Blasting, Electric

MIL-C-10691 - Cartridge, Remover, M29A1, Assembling, Marking, And Packing

MIL-C-10913 - Cartridge, Remover, Aircraft Canopy, M31

MIL-C-11008 - Catapult, Without Cartridge, Aircraft Personnel, M1

MIL-C-11504 - Charged, Demolition, Block Inert, 1 Pound Parts And Loading, Assembling And Packing

This specification covers the quality assurance provisions, and requirements not covered by the drawings, for the parts and loading, assembling and packing for one type of practice item designated as Charge, Demolition, Block, Inert, 1 Pound.

MIL-C-11762 - Cap, Blasting, Electric Inert, Assembly

This specification covers the fabrication, assembling and packing for one type of blasting cap designated as Cap, Blasting, Electric, Inert, Assembly.

MIL-C-12469 - Cryptographic Equipment Destroyer Incendiary, Th4, M1A2

This specification covers the requirements, quality assurance provisions, and packaging for one type of equipment destroyer.

MIL-C-12775 - Charge, Spotting, T60E3, Loading, Assembling And Packing

MIL-C-12918 - Charge, Demolition, Block, M5A1, Assembly Parts For, Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of demolition block designated as Charge, Demolition, Block, M5A1, Assembly.

MIL-C-13477 - Cyclotol

This specification covers two types of Cyclotol, high explosive mixture, intended for use in ammunition.

MIL-C-13597 - Crytographic Equipment Destroyer, Incendiary, Th4, M2A1, Components For (Use Mil-C-10244)

MIL-C-13739 - Composition, Delay

This specification covers zirconium-nickel alloy delay compositions intended for use in delay elements of fuzes.

MIL-C-13879 - Charge, Cratering, Parts For And Loading, Assembling And Packing

MIL-C-13882 - Charge, Explosive, Springing For Rod, Earth, Blast-Driven, M13

This specification covers one type of explosive springing charge for blast-driven earth rod M13.

MIL-C-13989 - Clip, Spring, Demolition

MIL-C-14003 - Cap, Blasting, Special

This specification covers special blasting caps for use in detonating various types of explosives.

MIL-C-18539 - Cartridge, Slick Marker An- Mk 1 Mod 0

This specification governs the manufacture, assembly, and preparation for delivery of the Cartridge, Slick Marker AN-Mk 1 Mod 0 and the methods of inspection and tests upon which acceptance will be based.

MIL-C-20327 - Charge, Propelling, For Separate Loading And Semi-Fixed Ammunition

This specification consists of this cover sheet and Specification 50-63-1C, dated 3 May 1945, attached hereto, without modification.

MIL-C-20331 - Charge, Propelling, M12, W/Primer M44, For Rod Earth, Blast Driven

MIL-C-20335 - Charge, Propelling, T5, T5E1, For Propulsion Unit Jet T10, T10E1

MIL-C-20356 - Cone, Glass

This specification covers one type of 60 degree glass cone.

MIL-C-20448 - Cap, Detonating, Electric, Waterproof (Fuze, Submarine Mine)

MIL-C-20496 - Cap, Blasting, Tetryl

MIL-C-20611 - Charge, Spotting, M4, Black Powder-Aluminum, Assembling, And Packing

MIL-C-2149 - Charge, Shaped, 40-Lb, M3 Loading, Assemblies, Marking And Packing

MIL-C-21906 - Cartridge, Butterfly Valve, Mark 1 Mod

MIL-C-22625 - Cartridge, Dumper Valve, Mark 22 Mod 0

This specification governs the manufacture, assembly, and preparation for delivery of the Mk 22 Mod 0 dumper valve cartridge and the methods of inspection and tests upon which product acceptance will be used.

MIL-C-25128 - Cartridge, Starter, Aircraft Engine, General Specification For (Use Mil-C-27658)

MIL-C-2553 - Charge, Spotting, M1A1, Black Powder Assembling And Packing

MIL-C-2554 - Catapult, With Cartridge, Aircraft Personnel, M1 Loading, Assembling, And Packing

MIL-C-25918 - Cartridge Actuated Devices, Aircraft Crew Emergency Escape, General Specification For (Use Mil-S-48405, Mil-L-50794, Mil-E-50796, Mil-C-83124, Mil-C-83125, Mil-P-83126 Or Mil-Std-1550)

MIL-C-27002 - Cartridge, Bomb Ejection Mlu-2/C And Cartridge Kit, Bomb Ejection Mlu-3/C (Use Mil-C-27019) Usaf ()

MIL-C-27019 - Cartridge Kit, Bomb Ejection Mlu-9/B

MIL-C-27564 - Cartridge, Bomb Ejection Mlu-16/B (Use Mil-C-38979)

MIL-C-373 - Clip, Cord, Detonating, M1

MIL-C-45420 - Cap, Blasting, Electric, M4, Assembly, Or Cap Assembly, Blasting, Connector And Electric

This specification contains requirements not covered by the drawings, and provides quality assurance provisions for the parts and assembly for two types of blasting caps designated as: a. Type I - Cap, Blasting, Electric, M4, Assembly b. Type II - Cap Assembly, Blasting, Connector and Electric

MIL-C-45461 - Charge, Propelling For Rocket Motor, M4

This specification covers the inspection and testing for one type propelling charge designated as Charge, Propelling, for Rocket Motor M4.

MIL-C-45469 - Cap, Blasting, Non-Electric: M7 Loading, Assembling And Packing

This specification covers quality assurance provisions and preparation for delivery for one type of Blasting Cap designated as Blasting Cap, Non-Electric: M7 (see 6.1).

MIL-C-46246 - Charges, Demolition, Tnt, Block, 1/4 Pound, 1/2 Pound, And 1 Pound

This specification covers quality assurance provisions and preparation for delivery for Charges, Demolition, TNT, Block, 1/4 Pound, 1/2 Pound, and 1 Pound.

MIL-C-46460 - Charge, Demolition, Block, M91 Parts For Loading, Assembling, And Packing

This specification covers special requirements not covered by the drawings and quality assurance provisions for one type of demolition item designated as Charge, Demolition, Block, M91.

MIL-C-46501 - Charge, Demolition, Linear, M96 And M58 Loading And Assembling

This specification covers quality assurance provisions and special requirements, not covered by the drawings, pertaining to the loading and assembling of one type of mine clearing charge designated as Charge, Demolition, Linear, M96 and M58 (see 6.4).

MIL-C-46525 - Charge, Demolition, Inert Linear, M97

MIL-C-46558 - Charge, Demolition, He, Linear, M58, W/Fuze And Charge, Demolition, Inert, Linear, M68, W/Inert Fuze Loading, Assembling And Packing

This specification covers requirements and quality assurance provisions for the loading, assembling and packing for one type of mine clearing device designated as Charge, Demolition, HE, Linear, M58, w/Fuze and Charge Demolition, Inert, Linear, M68, w/Inert Fuze.

MIL-C-46915 - Cap, Blasting, Electric, M6 Inert Assembly

This specification contains requirements not normally required by the drawings and provides for quality assurance provisions for the fabrication, assembling and packing for two types of blasting caps designated as Cap, Blasting, Electric, M6, Inert Assembly and Cap, Blasting, Electric, M6, Inert Assembly (Atlernative).

MIL-C-46916 - Cap, Blasting, Non-Electric Inert

This specification covers quality assurance provisions and preparation for delivery for one type of Blasting Cap designated as Cap, Blasting, Non-Electric, Inert.

MIL-C-46945 - Cutter, Power Actuated, Reefing Line, Xm23 Assembly

This specification covers Cutter, Powder Actuated, Reefing Line, XM23, Assembly loaded with Cartridge, Powder Actuated Cutter, M-129 for use in connection with cargo parachute controlled airdrops.

MIL-C-48114 - Charge, Demolition, H.E., Linear, M58, W/Fuze And Charge Demolition, Inert, Linear, M68, W/Inert Fuze, For Lvte7 Assembling And Packing

MIL-C-48853 - Circuit, Demolition, For Demolition Kit, Cratering, M180 Assembling And Packing

This specification covers the parts assembly, and packing for one type of Demolition Circuit for the M180 Demolition Cratering Kit.

MIL-C-50850 - Charge, Demolition, M118 Parts For, Loading, Assembling And Packing

This specification covers quality assurance provisions and preparation for delivery for parts and loading, assembling and packing of charge, Demolition: M118.

MIL-C-50919 - Clip, Cord, Detonating: M1

This specification covers quality assurance provisions and preparation for delivery for Clip, Cord, Detonating: M1.

MIL-C-60021 - Case, Carrying, M85, Assembly For Kit, Demolition, M37

This specification covers the fabrication of one type of carrying case designated as Case, Carrying, M85 Assembly.

MIL-C-60032 - Charge Assembly, Demolition Kit, M37 For Block Demolition, M5A1 Parts For Loading, Assembly And Packing

This specification covers special requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, loading, assembling and packing for one type of demolition item, designated as Charge Assembly, Demolition, M37 for Block Demolition M5A1.

MIL-C-60051 - Composition 86/14 Rdx/Wax

This specification covers one type of high explosive designated as Composition 86/14 RDX/WAX or Composition A-6 for use in ammunition.

MIL-C-60391 - Cartridge, Delay, 20 Second Delay, Xm252 Parts For (Use Mil-C-60393)

MIL-C-60393 - Cartridge, Delay: 20 Second Delay, Xm252 Parts, Loading, Assembling And Packing

This specification covers the parts, loading, assembling and packing for one type of time delay cartridge designated as Cartridge, Delay: 20 Second Delay, XM252.

MIL-C-60913 - Charge, Propellant, Increment Xm185 (M185) (Made From Propellant M9)

This specification covers Charge, Propellant, Increment, XM185, made from M9 Propellant for use in Cartridge, 81MM, Illuminating, XM652.

MIL-C-60940 - Cup, Lead Assembly For Fuzes, Pd, M551 And M533

This specification covers one type of lead cup assembly designated as Lead Cup Assembly for use in Fuzes, PD, M551 and M533.

MIL-C-60996 - Charge, Demolition Roll, M186 Parts, Loading, Assembling And Packing

This specification covers the parts, loading, assembling and packing for one type of demolition charge designated as Charge, Demolition Roll, M186.

MIL-C-63284 - Case Assembly, Carrying For Firing Device, Demolition, M122

This specification covers quality assurance provisions and preparation for delivery for the carrying case assembly for the M122 demolition firing device.

MIL-C-63325 - Coupling, Flush-Latch Assembly And Metal Parts For

This specification covers the parts and assembly for one type of coupling designated as Flush-Latch Coupling for Demolition Kit, Cratering: M180.

MIL-C-63373 - Circuit, Demolition Inert, For Demolition Kit, Cratering, Training, Xm270 Assembly And Packing

This specification covers the parts assembly, and packing for one type of Inert Demolition Circuit for the XM270 Demolition Cratering Kit, Training.

MIL-C-70683 - Charge, Demolition: 40Lb, Cratering Parts For And Loading, Assembling And Packing

This specification covers quality assurance provisions and preparation for delivery of the parts, loading, assembling and packing of Charge, Demolition: 401b, Cratering.

MIL-C-71013 - Charge, Demolition: Clipped, M221 Parts For, Assembling And Packing

This specification covers quality assurance provisions and preparation for delivery of the parts, loading, assembling and packing of Charge, Demolition: Clipped, M221.

MIL-C-81027 - Cartridge, Impulse, Mark 85 Mod 0

MIL-C-81028 - Cartridge, Impulse, Mark 66 Mod O

MIL-C-81029 - Cartridge, Impulse, Mark 52 Mod 0 (Primary) And Mark 53 Mod 0 (Secondary)

MIL-C-81250 - Carbon Black

MIL-C-82493 - Cable Assembly Mark 10Mod 0

This specification establishes the requirements of one type of Cable Assembly Mark 10 Mod 0. (See 6.1 for intended use and description.)

MIL-C-85077 - Caps, Blasting, Special

This specification covers electric, shielded blasting caps for use in detonating explosives (see 6.1).

MIL-C-967 - Cap, Blasting, Electric And Fuse (Use X-C-51)

MIL-D-11599 - Detonator, Delay, Inert, M1 And M2

MIL-D-12798 - Detonator, Flash, M49 Parts For Loading, Assembling And Packing

This specification covers parts for, loading, assembling and packing for one type of detonator designated as Detonator, Flash, M49.

MIL-D-13512 - Delay Element, Non-Delay M1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of delay element designated as Delay Element, Non-Delay, M1.

MIL-D-13638 - Dynamite (Ammonia, Ammonia-Gelatin, And Gelatin Types, Packaging Of

MIL-D-13670 - Detonator, Stab, M63 Parts For Loading, Assembling And Packing

This specification covers parts for, loading, assembling and packing for one type of detonator designated as Detonator, Stab, M63.

MIL-D-13684 - Detonator, Electric, M48 Parts For Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of electric initiating device designated as Detonator, Electric, M48.

MIL-D-13969 - Detonator, Concussion Type, M1

MIL-D-14140 - Detonator, Flash, M80 Parts For And Loading, Assembling And Packing

This specification covers the parts for and the loading, assembling and packing for one type of detonator designated as Detonator, Flash, M80.

MIL-D-14172 - Detonator, Electric, M51 Loading, Assembling And Packing

MIL-D-14360 - Document Destroyer, Emergency, Incendiary, M3

MIL-D-14978 - Detonator, Stab, M55 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of detonator designated as Detonator, Stab, M55.

MIL-D-18503 - Detonator Mk 22 Mod 0

This specification governs the manufacture, assembly, loading and preparation for delivery of Detonator Mk 22 Mod O and the methods of inspection and tests upon which acceptance will be based. Detonator Mk 22 Mod O is stab initiated.

MIL-D-18504 - Detonator Mk 27 Mod 0

This specification governs the manufacture, assembly, loading and preparation for delivery of Detonator Mk 27 Mod O and the methods of inspection and tests upon which acceptance will be based. The Detonator Mk 27 Mod O is stab initiated.

MIL-D-18505 - Detonator Mk 43 Mod 0

MIL-D-18506 - Detonator Mk 45 Mod 0

This specification governs the manufacture, assembly, loading, and preparation for delivery of Detonator Mk 45 Mod O and the methods of inspection and tests upon which acceptance will be based. The Detonator Mk 45 Mod O is flash initiated.

MIL-D-18507 - Detonator Mk 51 Mods 0 And 1 (Electric)

MIL-D-18522 - Detonator Mk 28 Mod 0

MIL-D-18537 - Destructor Mk 2 Mod 0

MIL-D-18615 - Detonator Mark 37 Mod 0

MIL-D-18616 - Detonator Mark 56 Mod 0

This specification governs the manufacture, assembly, loading, and preparation for delivery of Detonator Mk 56 Mod O and the methods of inspection and tests upon which acceptance will be based. Detonator Mk 56 Mod O is stab initiated.

MIL-D-18647 - Detonator Mark 53 Mod 0

MIL-D-18654 - Delay Element, Mk 10 Mod 0

MIL-D-18665 - Detonator Mk 59 Mod 0

This specification governs the manufacture, assembly, loading, and preparation for delivery of the Detonator Mark 59 Mod 0 and the methods of inspection and tests upon which acceptance will be based. Detonator Mark 59 Mod 0 is flash initiated.

MIL-D-18666 - Detonator Mk 54 Mod 0 And Mod 1

MIL-D-18681 - Detonator Mk 50 Mod 0

This specification governs the manufacture, assembly, loading, and preparation for delivery of the Detonator Mark 50 Mod 0 and the methods of inspection and tests upon which acceptance will be based. The Detonator Mark 50 Mod 0 is flash initiated.

MIL-D-20462 - Detonator, Electric, M36A1 Parts For And Loading, Assembling And Packing

MIL-D-204 - Dinitrotoluene For Use In Explosives (S/S By A-A-59256)

This specification covers dinitrotoluene for use in explosives.

MIL-D-2087 - Demolition Kit, Torpedo Bangalore, M1A2, He Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of demolition kit designated as Demolition Kit, Bangalore Torpedo, M1A2, HE.

MIL-D-2088 - Demolition Kit, Bangalore, M1A1, Inert, Parts For

This specification covers the parts for two types of demolition kits designated as Demolition Kit, Bangalore Torpedo, M1A2 and Torpedo, Bangalore, M1A1, Inert.

MIL-D-21354 - Dye, 1, 4-Diemthylamino-Anthraquinone (For Colored Smoke Mixtures)

This specification covers, 1, 4-Dimethylamino-anthra-quinine (blue dye) for use in the manufacture of colored smoke mixtures.

MIL-D-21524 - Detonator Assembly

This specification states the requirements for a detonator assembly used to fire a shaped metal-clad, igniter fuse.

MIL-D-23295 - Delay Element, Detonating Mk 19 Mod 0

This specification establishes the minimum requirements for the fabrication, preparation for delivery, and acceptance of the Delay Element, Detonating MK19 Mod 0, hereinafter referred to as the delay.

MIL-D-23850 - Demolition, Firing Device Mk 24 Mod. O

MIL-D-28606 - Dynamite, Nitroglycerin, Gelatin

MIL-D-38015 - Destruct Subsystem, General Requirements For

MIL-D-409 - Detonator,Percussion, Delay, 15 Second, M1A2 And 8 Second, M2A1 Loading, Assembling, And Packing

MIL-D-45411 - Demolition Kit, Projected Charge, M1E1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of demolition kit designated as Demolition Kit, Projected Charge, M1E1, complete with Rocket Motor Unit, M4.

MIL-D-45412 - Demolition Kit, M1E1, Container And Accessories

This specification covers the container and accessory parts for one type of demolition kit designated as Demolition Kit, M1E1, Container and Accessories.

MIL-D-45413 - Dynamite, Military, M1

This specification covers a medium velocity dynamite designated as M1 Military Dynamite.

MIL-D-45441 - Detonator, Stab, M61 Parts For And Loading, Assembling And Packing

This specification contains quality assurance provisions and special requirements for the parts, loading, assembling and packing of one type of initiating device designated as Detonator, Stab, M61.

MIL-D-45470 - Detonator, Electric, T76, Metal Parts For

This specification covers the metal parts for one type of detonator designated as Detonator, Electric, T76.

MIL-D-45471 - Detonator, Electric, T76, Loading, Assembling And Packing

MIL-D-45472 - Demolition Kit, Projected Charge, M157 Parts, Assembly And Packing

This specification covers the nose section assembly, tail section assembly, body section assembly, center section assembly, and explosive fuze container assembly for one type of mine clearing item designated as Demolition Kit, Projected Charge, M157.

MIL-D-45473 - Demolition Kit Projected Charge, M157 Loading, Assembling And Packing

MIL-D-45477 - Detonators, Percussion, Delay, 15 Second, M1A2 And 8 Second, M2A1, Parts For

MIL-D-45482 - Detonator, Stab M46, Parts For

This specification covers the parts for one type of stab detonator designated as Detonator, Stab, M46.

MIL-D-45483 - Detonator, Stab, M46 Loading, Assembling And Packing

This specification covers the loading assembly and packing for one type of stab detonator designated as Detonator Stab, M46.

MIL-D-45493 - Detonator, Stab, M61 Parts For (S/S By Mil-D-45441)

MIL-D-46205 - Delay Or Non-Delay Element, M9 Parts For

MIL-D-46206 - Delay Or Non-Delay Element, M9 Loading, Assembling And Packing

MIL-D-46207 - Detonator, Flash, M35, Loading Assembling And Packing

MIL-D-46208 - Detonator, Flash, M35, Parts For

This specification covers the quality assurance requirements for the component parts for one type of initiator designed as Detonator, M35.

MIL-D-46209 - Detonator, Stab, M44E1, Parts For, And Loading, Assembling And Packing

This specification covers the parts for and the loading, assembling and packing for one type of detonator designated as Detonator, Stab, M44E1.

MIL-D-46210 - Detonator, M44E1 Parts For (S/S By Mil-D-46209)

MIL-D-46217 - Detonator, M20, Parts For

MIL-D-46218 - Detonator, Stab, M22 Parts For (Use Mil-D-46219)

MIL-D-46219 - Detonator, Stab, M22 Parts For Loading, Assembling And Packing

This specification covers the parts for loading, assembling and packing for one type of stab detonator designated as Detonator, Stab, M22.

MIL-D-46255 - Detonator, Stab, M24 Parts For (S/S By Mil-D-46256)

MIL-D-46256 - Detonator, Stab M24 Parts For, And Loading Assembling And Packing

This specification covers the parts for, loading assembling and packing for one type of stab detonator designated as Detonator, Stab M24.

MIL-D-46260 - Detonator, Stab, T33El Parts For (Use Mil-D-13670)

MIL-D-46262 - Detonator, Stab, M20, Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designated as Detonator, Stab, M20.

MIL-D-46282 - Detonator, Stab, M23 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designated as Detonator, M23.

MIL-D-46284 - Detonator, Stab, M45 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designated as Detonator, M45.

MIL-D-46285 - Detonator, Stab, M45 Parts For

This specification covers the parts for one type of stab detonator designated as Detonator, M45.

MIL-D-46286 - Detonator, Flash, M21 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type flash detonator designated as Detonator, M21.

MIL-D-46287 - Detonator, Flash, M80 Parts For (S/S By Mil-D-14140)

MIL-D-46288 - Detonator, M23 Parts For

This specification covers the part for one type of detonator designated as Detonator, M23.

MIL-D-46290 - Detonator, Stab, M21, Parts For

MIL-D-46299 - Detonator, Stab, M13, Parts For

This specification covers the parts for one type of detonator designated as Detonator, Stab, M13.

MIL-D-46404 - Detonator, Stab, M13 Loading, Assembling And Packing

This specification covers the loading, assembling, and packing for one type of stab detonator designated as Detonator, M13.

MIL-D-46405 - Detonator, Stab, M18, Parts For

This specification covers the parts for one type of stab detonator designated as Detonator, Stab, M18.

MIL-D-46406 - Detonator, Flash, M17 Parts For And Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of detonator designated as Detonator, Flash, M17.

MIL-D-46418 - Delay Element, T6E4, And T5E3, Parts For

MIL-D-46432 - Detonator, Stab, M18, Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designated as Detonator, M18.

MIL-D-46454 - Delay Element, M2 Parts For (S/S By Mil-D-46486)

MIL-D-46461 - Detonator, Stab, M19A2, Parts For

MIL-D-46462 - Detonator, Stab, M19A2 Loading, Assembling And Packing

MIL-D-46483 - Delay Element, T6E4 And T5E3 Loading, Assembling And Packing

MIL-D-46486 - Delay Element, M2, Parts For, Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing for one type of delay element designated as Delay Element M2.

MIL-D-46491 - Detonator, Electric, M36A1, Part For (S/S By Mil-D-20462)

MIL-D-46517 - Demolition Container, Exi-Mod O For Demolition Kit, Projected Charge, He, Xm125 And Inert, Xm126

MIL-D-46539 - Destructor, Explosive, M19, Loading, Assembling And Packing

MIL-D-46592 - Detonator, Stab, M58 Parts For

This specification covers the parts for one type of detonator designated as Detonator, Stab, XM58.

MIL-D-46645 - Detonator, M31A1, Parts For (S/S By Mil-D-46653)

MIL-D-46647 - Detonator, Stab, Xm58, Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of detonator designated as Detonator, Stab, M58.

MIL-D-46653 - Detonator, M31A1 Parts For, And Loading, Assembling And Packing

This specification covers the parts for loading, assembling and packing for one type detonator designated as Detonator M31A1.

MIL-D-46673 - Delay Assembly, T47, Parts For

MIL-D-46674 - Delay Assembly, T47, Loading, Assembling And Packing

MIL-D-46688 - Demolition Kit, Projected Charge, M173, And Practice, M174 Loading, Assembling And Packing

This specification covers quality assurance requirements , and special requirements not covered by the drawings, pertaining to the loading and assembling of one type of mine clearing device designated as Demolition Kit, Projected Charge, M173 or Practice, M174.

MIL-D-46911 - Detonator, Flash, M17 Parts For ( S/S By Mil-D-46406)

MIL-D-48025 - Detonator, Stab, M99 Parts For And Loading Assembling And Packing

This specification covers the parts and the loading, assembling and packing for one type of stab detonator designated as Detonator, Stab, M99.

MIL-D-48046 - Detonator, Stab: Xm91 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of detonator designated as Detonator, Stab: XM91.

MIL-D-48111 - Detonator, Stab, M94 Parts For And Loading, Assembling And Packing

This specification covers the parts and the loading, assembling and packing for one type of detonator designated as Detonator, Stab, M94.

MIL-D-48116 - Delay Element M2, For Fuzes M557 And M524 Part For And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing for one type of delay element designated as Delay Element M2.

MIL-D-48120 - Detonator, Electric, M100 Parts For And Loading, Assembling And Packing

This specification covers requirements, quality assurance provisions, packaging, fabrication, manufacture and loading of one type of electric detonator designated as Detonator, Electric, M100.

MIL-D-48221 - Detonator Electric M95 (T61) Parts For Loading, Assembling, And Packing

This specification covers the inspection of the parts and the loading, assembling and packing for one type of electric detonator designated as the M95 Electric Detonator.

MIL-D-48865 - Detonator, Electric, Pa500 Parts For, Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of electric detonator designated as Detonator, Electric, PA500.

MIL-D-50420 - Detonator, Stab, M98 (T83E1) Parts For, And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading assembling and packing of a stab type detonator designated as Detonator, Stab, M98.

MIL-D-50441 - Delay Element M53 Metal Parts For (S/S By Mil-D-14951)

MIL-D-50476 - Detonator, Electric, M78E1 Parts And Loading, Assembling And Packing

MIL-D-50540 - Detonator, Flash, Xm97 Parts For, And Loading Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of flash detonator designated Detonator, Flash, XM97.

MIL-D-50575 - Delay Detonator Assembly, Stem For

MIL-D-50584 - Delay Detonator Assembly (Dwg. C-9207798)

This specification covers the Delay Detonator Assembly (Dwg. C-9207798).

MIL-D-50865 - Detonator, Stab, M59 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of detonator designated as Detonator, Stab, M59.

MIL-D-50868 - Detonator, Flash, M85 Parts And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of flash detonator designated as Detonator, Flash, M85.

MIL-D-50908 - Demolition Kit, Cratering: M180 Assembling And Packing

This specification covers quality assurance provisions and preparation for delivery for the assembling and packing of the Demolition Kit, Cratering: M180.

MIL-D-50978 - Detonator, Flash M86 Parts For, Loading, Assembling And Packing

This specification covers parts for, loading, assembling and packing for one type of detonator designated as Detonator, Flash, M86.

MIL-D-60013 - Detonator, Stab, M47 Parts For (S/S By Mil-D-60014)

MIL-D-60014 - Detonator, Stab M47 Loading, Assembling And Packing

This specification covers the parts for, and the loading, assembling and packing for one type of detonator designated as Detonator, Stab M47.

MIL-D-60047 - Detonator, Flash, M49 Parts For (S/S By Mil-D-12798)

MIL-D-60092 - Detonator, Stab, M50 Parts For (Use Mil-D-60093)

MIL-D-60093 - Detonator, Stab, M50 Parts For And Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of detonator designated as Detonator, Stab, M50.

MIL-D-60094 - Detonator, Electric, Xm65 Parts For

This specification covers the parts for one type of detonator designated as Detonator, Electric, XM65.

MIL-D-60095 - Detonator, Electric, Xm65 Loading, Assembling & Packing

This specification contains requirements not normally required by the drawings and provides for quality assurance provisions for the loading, assembling and packing for one type of initiating device designated as Detonator, Electric, XM65.

MIL-D-60328 - Detonator, Stab, T37 Parts For

MIL-D-60329 - Detonator, Stab, T37 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designated as Detonator, Stab, T37.

MIL-D-60332 - Detonator, Stab, M41 Parts For

This specification covers the parts for one type of stab detonator designated as Detonator, Stab, M41.

MIL-D-60360 - Detonator, Stab, M42 Parts For (S/S By Mil-D-60362)

MIL-D-60362 - Detonator, Stab, M42 Parts For And Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab detonator designed as Detonator, Stab, M42.

MIL-D-60365 - Dynamite (Commercial)

This specification covers the basic requirements for four types of commercial dynamite that shall be of a non-freezing type and shall contain no non-combustible material other than a commercially acceptable antacid.

MIL-D-60387 - Detonator, Flash, Xm87 Parts For

MIL-D-60388 - Detonator, Flash, M87 Parts For Loading, Assembling And Packing

This specification covers parts for, loading, assembling and packing for one type of detonator designed as Detonator, Flash, M87.

MIL-D-60473 - Detonator, Stab Xm-90 Metal Parts, Loading, Assembling And Packing

MIL-D-63057 - Detonator, Stab, Pa501 Parts For Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of stab detonator designated as Detonator, Stab PA501.

MIL-D-63058 - Detonator, Flash, Pa502 Parts For, Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of flash detonator designated as Detonator, Flash PA502.

MIL-D-63059 - Detonator, Stab, Pa503 Parts For Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of stab detonator designated as Detonator, Stab PA 503.

MIL-D-63121 - Decoder Firing Hybrid For Xm122 Firing Device Receiver (Superseded See Classified Index)

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of hybrid decoder for the XM122 firing device receiver.

MIL-D-63144 - Dc To Dc Inverter, Electronic Timer Module

This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of Inverter, DC to DC, Electronic Timer Module for the XM-122 firing device receiver.

MIL-D-63197 - Detonator, Delay, Electric: Pa506; Parts For, And Loading, Assembling And Packing

This specification covers the parts for , and the loading, assembling and packing for one type of electric delay detonator designated Detonator, Delay, Electric: PA506.

MIL-D-63266 - Document Destroyer, Emergency Incendiary: M4

This document covers requirements and quality assurance provisions for one type of incendiary device.

MIL-D-63376 - Demolition Kit, Cratering, Training, Xm270 Inert Assembly And Packing

This specification covers the assembling and packing for one type of demolition kit, training designated as Demolition Kit, Cratering Training: XM270 Inert.

MIL-D-71199 - Demolition Attack Munition: M3

This specification contains the requirements and provides quality assurance provisions for the fabrication of parts and assemblies, and loading and packing of the Demolition Attack Munition (DAM): M3. (See 6.1)

MIL-D-82490 - Driver, Gas Operated, Mark 8 Mod 0

This specification establishes the requirements of one type of Driver Gas Operated Mark 8 Mod 0. (See 6.1 for intended use and description.)

MIL-D-85294 - Detonator, Electric, Mark 71 Mod 1

This specification establishes the requirements for manufacture and acceptance of the MARK 71 MOD 1 Electric Detonator, referred to herein as the detonator.

MIL-DTL-12957 - Destructor, Explosive: Universal - M10 Assembly Parts, Loading, Assembling And Packing

This specification covers the requirements for the Destructor, Explosive; Universal, M10 Assembly Parts, Loading, Assembling and Packing.

MIL-DTL-13139 - Charge, Demolition, Shaped, 15 Lb.-M2A4 Parts For

This specification covers the parts for one type of demolition item designated as Charge, Demolition, Shaped, 15 lb.-M2A4.

MIL-DTL-17124 - Cord, Detonating And Dummy Cord, Detonating

This specification describes the requirements, examinations and tests for the following items: Cord, Detonating and Dummy Cord, Detonating.

MIL-DTL-2156 - Charge, Demolition, Shaped, 15 Lb. - M2A4 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of demolition kit designated as Charge, Demolition, Shaped, 15lb. - M2A4.

MIL-DTL-244 - Nitrocellulose

This specification covers the requirements, examinations and tests for various grades, types, and classes of nitrocellulose (NC) for use in propellant and combustible case manufacturing.

MIL-DTL-417 - Adapter, Priming: M1A5.

This specification covers the requirements for Adapter, Priming: MlA5.

MIL-DTL-45144 - Fuse, Blasting, Time - M700, And Dummy Fuse, Blasting, Time - Inert Loading, Assembling And Packing

This specification covers the design, materials, quality assurance provisions and preparation for delivery of two types of fuses: FUSE, BLASTING, TIME: M700 and DUMMY FUSE, BLASTING, TIME, INERT.

MIL-DTL-45468 - Cap, Blasting: Electric - M6 Parts For, And Loading, Assembling And Packing

This specification covers the parts for, and loading, assembling and packing for one type of blasting cap designated as CAP, BLASTING: electric, M6.

MIL-DTL-46550 - Charge, Demolition, Shaped, 40 Lb. M3A1, Metal Parts Assembly

This specification covers the parts and assemblies for one type of demolition kit designated as Charge, Demolition, Shaped, 40 lb., M3A1.

MIL-DTL-46594 - Charge, Demolition, Shaped, 40 Lb. M3A1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of demolition item designated as Charge, Demolition, Shaped, 40 Lb., M3A1.

MIL-DTL-50523 - Charge, Demolition - M112 Parts For And Loading, Assembling And Packing

This specification covers the parts for one type of demolition charge designated as charge, demolition - M112 parts for loading, assembling and packing.

MIL-DTL-50525 - Charge Assembly, Demolition, M183 With Charge, Demolition - M112, Parts For, Loading, Assembly, And Packing

This specification prescribes the requirements and identifies the verification methods for Charge Assembly, Demolition, M183 with Charge, Demolition - M112 Parts for, Loading, Assembling and Packing.

MIL-DTL-50911 - Priming Assembly For Demolition Charge Assembly : M183 Parts For And Loading, Assembling And Packing

This specification prescribes the requirements and identifies the verification methods for the Priming Assembly for Demolition Charge Assembly: M183 Parts For and Loading, Assembling and Packing.

MIL-E-20308 - Explosive, Demolition, Nitro-Starch, Compressed One Pound Blocks

MIL-E-29236 - Explosives, Blasting Agent, Slurry, With Boosters, Military Construction

This specification covers a slurry blasting agent (SBA) for use in breaking rock formations by loading bore holes and blasting for quarry and grade construction excavations in wet and dry, cold (-20 deg. F storage environments) (40 deg. f minimum in bore holes) and warm (plus 120 deg. F) storage and ambient environments.

MIL-E-46201 - Element, Relay, Xm-Parts For

MIL-E-46202 - Element, Relay, Xm-Loading, Assembling And Packing

MIL-E-46495 - Explosive Composition Hta-3

This specification covers an explosive composition having two types (Type I and Type II) designated as HTA-3 for use in the loading of warheads and other ammunition items.

MIL-E-85113 - Explosive, Plastic Bonded Extrudable Power, Pbxc-203(I)

MIL-F-10591 - Fuze, Point Detonating, M9, Loading, Assembling, And Packing

MIL-F-13549 - File Destroyer, Incendiary, Abc-M4

MIL-F-13893 - Firing Device, Demolition, Delay Type, M1 Parts For And Loading, Assembling And Packing

This specification covers the parts for, loading, assembling, and packing for one type of firing devise designated as Firing Device, Demolition, Delay Type, M1.

MIL-F-18405 - Fuse, Firecracker, 30-Second

This specification covers one type of 30-second firecracker fuse.

MIL-F-1887 - Fuse, Time-Delay, 0.150 Ampere

MIL-F-20409 - Fuse, Red, 20 Minute, M72, Assembling, Marking, And Packing

MIL-F-20412 - Fuse, Safety (Bickford Type)

The fuse shall consist of a thin train of powder tightly compressed in inner and outer wrappings of jute thread, cotton thread, or tape, with a suitable waterproofing material between them.

MIL-F-20600 - Fuze, Safety, Special (Bickford Type)

MIL-F-2095 - Fuzes, Point Detonating, M48A3, M51A5, Mod 3, And M81A1, Metal Parts For (S/S By Mil-F-60348)

MIL-F-22180 - Firing Device, Demolition Mark 6 Mod 0

This specification covers the requirements for the procurement of the Demolition Firing Device Mark 6 Mod 0.

MIL-F-23831 - Firing Device, Demolition, Mark 23 Mod 0

MIL-F-23998 - Firing Device, Demolition Mk 24 Mod 1

MIL-F-45116 - Fastener Unit, Powder Actuated, Above And Underwater Type (Use Ggg-D-7771

MIL-F-46283 - Firing Device, Non-Metallic, Pull Type, T35E1, Loading, Assembling And Packing

This specification covers parts, loading, assembling and packing for one type of firing device designated as Firing Device, Non-Metallic, Full-Type, T35E1.

MIL-F-46298 - Firing Device, Pull Release Type, M3 Parts, Loading, Assembling And Packing

This specification covers the parts for and loading assembling and packing for one type of firing device designated as Firing Device, Pull Release Type, M3.

MIL-F-46407 - Firing Device, Non-Metallic, Release-Type, T36E1, Loading, Assembling, And Packing

MIL-F-46524 - Firing Kit, Demolition, Electrical Xm 147E1

This specification covers the quality assurance provisions, and requirements not covered by drawings, for one type of firing mechanism designated as Firing Kit, Demolition, Electrical, XM-147E1.

MIL-F-46561 - Fuze, Demolition Kit, Training, M1147 Parts, Assembling, And Packing

This specification covers the parts, assembling, and packing of one type of fuze designated as Fuze, Demolition Kit, Training, M1147.

MIL-F-46570 - Fuze, Demolition Kit, M1134 With Detonators Parts For

This specification covers the parts, assembling, and packing for one type of fuze designated as Fuze, Demolition Kit, M1134.

MIL-F-46571 - Fuze, Demolition Kit, M1134 Loading, Assembling And Packing

This specification covers the loading, assembling, and packing of one type of fuze designated as Fuze, Demolition Kit, M1134.

MIL-F-46629 - Firing Device T52 Assembly, Parts, Assembly And Packing

MIL-F-46657 - Firing Device, Demolition, Pull Type, M1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of firing device designated as Firing Device, Demolition, Pull Type, M1.

MIL-F-50454 - Fuze, Grenade M219A1 And M219A2 Loading, Assembling And Packing

This specification covers the requirements, examination and tests for the loading, assembling and packing of two types of fuzes designated as Fuze, Grenade, M219A1 and M219A2.

MIL-F-50495 - Firing Device, Pressure Release Type, M5 And M5 Inert Assembly Parts For And Loading, Assembling And Packing

This specification covers the parts for, loading assembling and packing for one type of firing device designated as Firing Device, Pressure Release Type, M5 and M5 Inert Assembly.

MIL-F-63090 - Firing Device, Multi-Purpose, M142 Parts, Assembly, And Packing

This specification covers the loading, assembling and packing for one type of firing device, designated as Firing Device, Multi-Purpose, M142.

MIL-F-63145 - Firing Device Receiver Xm112 (Superseded See Classified Index)

MIL-F-70736 - Fuze, Demolition Kit, M1134A3 With Detonators, Parts For

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing for one type of fuze designated as Fuze, Demolition Kit, M1134A3.

MIL-F-70737 - Fuze, Demolition Kit, M1134A3 Loading, Assembling And Packing

This specification contains requirements not normally covered by the drawings, and provides quality assurance provisions for the loading, assembling, and packing of one type of fuze designated as Fuze, Demolition Kit, M1134A3.

MIL-F-70757 - Fuze, Demolition Kit, M1134A2 Loading, Assembling And Packing

This specification contains requirements not normally covered by the drawings, and provides quality assurance provisions for the loading, assembling, and packing of one type of fuze designated as Fuze, Demolition Kit, M1134A2.

MIL-F-70758 - Fuze, Demolition Kit, M1134A2 With Detonators, Parts For

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing for one type of fuze designated as Fuze, Demolition Kit, M1134A2.

MIL-G-14931 - Grease, Silicone For Use With Ammunition

This Military Specification covers one type of silicone grease for use in ammunition (see 6.2).

MIL-G-23323 - Generator, Gas, Mk 7 Mod 0

MIL-G-25641 - Generator, Gas, Solid Propellant, Aeronautical, General Specification For

MIL-H-48398 - Holder, Blasting Cap, M8

This specification covers the part and packing for one type of Cap Holder designated as Holder, Blasting Cap, M8.

MIL-I-10243 - Incendiary, Safe Destroying, M1A1

MIL-I-10291 - Initiator, Buster, M1, M2 And T7 Loading, Assembling, And Packing

MIL-I-10682 - Igniter, Electric, M19 For Simulator, Gunflash, M110

MIL-I-11525 - Ignition Cylinder, Flame Thrower, Portable, M1

This specification covers one type of ignition cylinder.

MIL-I-12478 - Incendiary, Safe Destroying, M1A2, Components For (S/S By Mil-C-12469)

MIL-I-12597 - Igniter, Blasting Fuse, Friction Type, M3A1 Loading, Assembling And Packing

This specification covers the loading assembling and packing for one type of initiating device designated as Igniter, Blasting Fuse, Friction Type, M3A1.

MIL-I-14729 - Increment, Propellant, M90E1

This specification covers one type of propellant increment designated as M90E1 for Mortar Cartridge 81MM.

MIL-I-17924 - Igniter Mk 114 Mod 1

This specification covers one type of igniter used in rocket motors.

MIL-I-17943 - Igniter Mark 125 Mod 4

MIL-I-17946 - Igniter Mark 112 Mod 2

MIL-I-18672 - Initiator, Detonating Cord Mark 7 Mod 0

This specification governs the manufacture, assembly, loading, and preparation for delivery of Mark 2 Mod 0 Detonating Cord Initiator and the methods of inspection and tests upon which acceptance will be based.

MIL-I-21238 - Igniter, Mark 127 Mods

MIL-I-22027 - Igniter, Jet Engine, Mk 243 Mod 2

This specification governs the manufacture, assembly and preparation for delivery of the Igniter, Jet engine Mk 243 Mod 2 and methods of inspection and tests upon which product acceptance will be based.

MIL-I-22140 - Igniter Mark 157 Mod 0

MIL-I-22155 - Igniter, Gas Generator, Mk 244 Mod 0

MIL-I-22175 - Igniter Mark 178 Mod 0

MIL-I-23488 - Ignition Element, Electric, Mark 10 Mod 0

This specification governs the manufacture, assembly and preparation for delivery of the Ignition Element, Electric, Mark 10 Mod 0, and the methods of inspection and tests upon which product acceptance will be based.

MIL-I-394 - Igniter, Time, Blasting Fuse, Weatherproof, M60, Parts For And Loading, Assembling And Packing

MIL-I-46434 - Igniter, Electric, M59, Parts For And Loading, Assembling And Packing

This specification covers the parts for, loading assembling and packing for one type of igniter, designated as Igniter, Electric, M59.

MIL-I-46435 - Igniter, Electric, M59 Metal Parts (S/S By Mil-I-46434)

MIL-I-46437 - Igniter, Document Destroyer, Incendiary, M25

MIL-I-46912 - Increment, Propellant, Xm90 (M90)

This specification covers one type of propellant increment designated as XM90 for Mortar Cartridge 81MM.

MIL-I-48110 - Igniter Assembly, Rocket, For Demolition Kit, Cratering, M180

This specification covers quality assurance provisions and preparation for delivery for the igniter assembly for the Rocket Motor for Demolition Kit, Cratering, M180.

MIL-I-48632 - Integrated Circuit, Digital, Cmos Control And Timing Base, Monolithic, Silicon

This specification establishes the performance, test, manufacturing and acceptance requirements for the integrated circuit (I.C.) to be used in the M718E1/M741E1 Mines.

MIL-I-48634 - Integrated Circuit, Digital, Cmos Logic Array Monolithic Silicon

This specification establishes the performance, test, manufacturing and acceptance requirements for the logic array integrated circuit (I.C.) to be used in the M718E1/M741E1 Mines.

MIL-I-50401 - Igniter, Time, Blasting Fuse, Practice, Xm77 Parts, Assembling And Packing

MIL-I-50867 - Ignition Element Electrical Loading, Assembling And Packing

This specification covers the loading, assembling and packing of the Ignition Element Electrical intended for use with 152MM cartridges.

MIL-I-63120 - Intermediate Frequency/Discriminator/Square Amplifier Hybrid For Xm122 Firing Device Receiver

This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of microcircuit hybrid module for the XM122 firing device receiver.

MIL-L-0020336 - Loading, Assembling, And Packing Of High Explosive Shell With Cast Trinitrotoluene (Tnt) And Cast Composition B

MIL-L-17186 - Lead Styphnate, Normal (Commercial Grade)) (Use Mil-L-757)

MIL-L-46423 - Link, Separation, Double Squib

MIL-L-48066 - Lead, Multi-Purpose Parts For, And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of lead designated as Lead, Explosive, PA 510.

MIL-L-48176 - Liner (Titanium Dioxide And Wax) For Use In Cartridges

This specification covers liners which essentially consist of titanium dioxide and wax on cartridge cloth or scrim for use in tank and artillery cartridges (see 6.1).

MIL-L-63119 - Local Oscillator/Mixer Hybrid For Xm122 Firing Device Receiver (S/S See Classified Index)

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of hybrid local oscillator/mixer for the XM122 firing device receiver.

MIL-L-63246 - Leads, Explosive, Pa509, Pa512, Pa513, Pa514, Pa516, Pa517 And Pa521; Parts For, And Loading, Assembling And Packing

This specification contains requirements not covered by the drawings, and provides quality assurance provisions for the fabrication of parts, and loading, assembling and packing for seven types of explosive leads designated as Leads, Explosive, PA509, PA512, PA513, PA514, PA516, PA517 and PA521.

MIL-M-13685 - Mine, At, Nm, M19 With Arming Wrench M22 Loading Assembling And Packing

This specification covers the loading, assembling, and packing for one type of mine designated as MIne, Anti-tank, Nonmetallic, M19.

MIL-M-18572 - Marker Mark 7 Mod 2 (Marine)

MIL-M-46263 - Max-2 Explosive

This specification covers one type of explosive designated as MAX-2, for use in ammunition.

MIL-M-48183 - Munition For Projectile, 155Mm, M692/M731, Delay Detonator For

This specification contains requirements not normally covered by the drawings, and provides quality assurance provisions for the fabrication of parts, loading, assembling and packing for one type of Delay Detonator for the munition used in Projectiles, 155mm, M692/M731. (See 6.1)

MIL-M-48185 - Munition For Projectile, 155Mm, He, M692/M731, Detonating Cord Assembly For

This specification contains requirements not normally covered by the drawings, and provides quality assurance provisions for the fabrication of parts, loading, assembling and packing for one type of Detonating Cord Assembly used in the munition for Projectiles, 155mm,M692, and M731. (See 6.1)

MIL-M-50974 - Motor-Detonator Assembly, Rocket, Loading, Assembling And Packing (For Demolition Kit, Cratering: M180)

MIL-M-63248 - Microdetonator Clip Assembly Parts For

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing for Microdetonator Clip Assembly.

MIL-M-63375 - Motor-Detonator Assembly, Rocket, Inert, For Demolition Kit, Cratering, Training, Xm270, Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of Motor-detonator assembly designated as Motor-detonator Assembly, Rocket, Inert for Demolition Kit, Cratering, Training, XM270.

MIL-M-64016 - Motor, Rocket, Metal Parts For And Loading Assembly For Demolition Kit, Cratering M180

This specification covers quality assurance provisions and preparation for delivery for the metal parts and loading assembly of the rocket motor for Demolition Kit, Cratering: M180.

MIL-M-877 - Mat, Blasting, Rope

MIL-P-10480 - Plunger, Delay, M1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of plunger designated as Plunger, Delay, M1.

MIL-P-10984 - Pellets Black Powder

MIL-P-11200 - Propellent System, Aircraft Canopy Remover, M1A1

MIL-P-11612 - Printing Assembly, Demolition, M15, Inert

MIL-P-11824 - Primer, No. 1-1/2

This specification covers one typeof fuze primer.

MIL-P-11960 - Propellant, General For Methods Of Inspection, Sampling And Testing (S/S By Mil Std-286)

MIL-P-12951 - Primer, Percussion, M39A1 Parts For, And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of percussion primer designated as Primer, Percussion M39A1.

MIL-P-13392 - Primer, Percussion, M54 Parts For And Loading, Assembling And Packing

This specification covers the parts and the loading, assembling and packing for one type of percussion primer designated as Primer, Percussion, M54.

MIL-P-14139 - Primer, Stab M72 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab primer designated as Primer, Stab M72.

MIL-P-14796 - Process Oil (For Use With Ammunition)

This specification covers one type of process oil for use with ammunition.

MIL-P-18601 - Priming Mixture, Wet Mix, For Small Arms (F. A. No. 70 And F. A. No. 70A)

MIL-P-20378 - Plunger, Delay Mi, Parts For

This specification covers the parts for one type of plunger designated as Plunger, Delay, M1 (see 6.4).

MIL-P-20406 - Propulsion Unit, Jet, T10E1, Metal Parts For.

MIL-P-20433 - Propulsion Unit, Jet, T10E1, Loading, Assembling, Marking And Packing.

MIL-P-20444 - Primer, Percussion, M42 Parts For And Loading, Assembling And Packing

This specification contains quality assurance provisions and special requirements for the parts, loading, assembling and packing of one type of initiating device designated as Primer, Percussion, M42.

MIL-P-22264 - Powder, Ignition, Gasless, A-1A

This specification covers the minimum requirements for the procurement of A-1A gasless ignition powder.

MIL-P-23113 - Pentaerythritol Acetate Propionate (Peap)

MIL-P-23929 - Propellant, H8

This specification covers the basic requirements for a special type of propellant that is produced as a cylindrical single perforated grain.

MIL-P-2496 - Primer, Percussion, M29A1 Parts And Loading, Assembling And Packing

This specification covers the parts and the loading, assembling, and packing for one type of initiating device designated as Primer, Percussion, M29A1.

MIL-P-270 - Propellant, Artillery

This specification covers the basic requirements for all on the individual classes of smokeless cannon propellants. The requirements for the individual classes of smokeless propellants are covered in the corresponding detail specifications.

MIL-P-3207 - Propellant, Powder, For Small Arms Ammunition, Caliber .45

MIL-P-323 - Propellant, M2 And M5

This specification, together with Specification MIL-P-270 covers two classes of artillery propellant.

MIL-P-45447 - Powder, Molding, Pbx 9010

MIL-P-45486 - Pellet, Rdx

This specification covers RDX pellets for use in ammunition (see 6.4).

MIL-P-46213 - Primer, Percussion, M42 Parts For (Use Mil-P-20444)

MIL-P-46214 - Primer, Percussion, M39A1 Parts For (Use Mil-P-12951)

MIL-P-46230 - Propellant M6 For Use In Charge Propelling, 175Mm, M199 And M86A2B1

This specification covers M6 Propellant for use in the M199 and M86A2B1 propelling charges employed with the M437 series projectiles.

MIL-P-46235 - Propellant, M26 (T28) For Use In Cartridges M344 And M346, In 106Mm Rifles

This specification covers the M26 (T28) propellant for use in propelling charge for 106MM rifle ammunition.

MIL-P-46408 - Primer, Percussion, M61, Parts For (S/S By Mil-P-20449)

MIL-P-46425 - Primer, Percussion, M35 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of percussion primer designated as Primer, Percussion, M35.

MIL-P-46426 - Propellant, M5, For Use In And Cartridge, 90Mm, Heat, M371 & M371E1

This specification covers the M5 propellant for use in the 90MM HEAT Cartridge, M371, M371E1 and 90MM Practice M371.

MIL-P-46465 - Primer, Percussion, M35, Parts For

This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M35.

MIL-P-46489 - Propellant, M30 For Use In Cartridge, 105Mm, Apds-T, M392A2

This specification covers M30 Propellant for use in Cartridge, 105MM, APDS-T, M392A2.

MIL-P-46542 - Primer, Percussion, M27, Parts For

This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M27.

MIL-P-46544 - Primer, Percussion, M29A1, Parts For

This specification contains special requirements not normally required by the drawings and provides quality assurance provisions for the fabrication of parts for one type of initiating device designated as Primer, Percussion, M29A1.

MIL-P-46551 - Primer, Percussion, M36A1, Parts For (S/S By Mil-P-46601)

MIL-P-46698 - Propellant, M1, For Use In Charge Propelling M1 (Green Bag) For 8 Inch Howitzer

MIL-P-46953 - Propellant, T36E1, For Use In Charge, Propelling, 155Mm, Xm-115 (White Bag)

MIL-P-46955 - Primer, Percussion, M54 Parts For (Use Mil-P-13392)

MIL-P-46994 - Pellets/Granules Boron/Potassium Nitrate

This specification covers seven (7) types of igniter pellets/granules for use in rocket motors and fuzes.

MIL-P-48051 - Propellant M10 For Use In Cartridges, For 57Mm Rifle, M18 And M18A1

This specification covers M10 Propellant for use in the following cartridges employed with the M18 and M18A1, 57MM Recoilless Rifles: Cartridge, Heat, M307A1, Cartridge, WP Smoke, M308A1, Cartridge, TP, M306A1, Cartridge HE, M306A1, Cartridge, Canister, T25E5.

MIL-P-48058 - Propellant M6 For Use In Cartridge 105Mm, Hep-T, M327

MIL-P-48127 - Propellant, M9 For Use In Charge, Propelling, M36A2

This specification covers M9 Propellant for use in the following Cartridge employed with the 4.2 Inch Mortar, M30: cartridge, HE, M329A2.

MIL-P-48181 - Propellant M30A2 For Use In Charge Propelling, M188 And M188E1 For 8 Inch Projectiles

MIL-P-48231 - Propellant M6 For Use In Cartridge, 105Mm Apers-T, M494

This specification covers M6 Propellant for use in the M494 Cartridge employed with the 105mm, M68 Gun.

MIL-P-48250 - Primer, Stab, M55 Parts And Loading, Assembling, And Packing

This specification covers the parts and the loading, assembling and packing for one type of initiating device designated as Primer, Stab, M55. (This primer is used solely for testing flash detonators).

MIL-P-48256 - Propellant M30A1 For Use 1N Charge, Propelling Xm201E1 For 155Mm Projectile, Rocket-Assisted M549

MIL-P-48257 - Propellant M30A1 For Use In Charge, Propelling, Xm203 For 155Mm Projectile, Rocket-Assisted, M549

MIL-P-48266 - Propellant M30 For Use In Cartridge, 105Mm, Apds-T, M728

This specification covers M30 Propellant for use in the M728 Cartridge for the 105mm, M68 gun.

MIL-P-48348 - Propellant M1 For Use In Charge, Propelling, Xm164

This specification covers M1 salted Propellant for use in the XM164 Propelling charge employed with the 155MM Howitzers, M109A1 and XM198, during DT/OT II testing only.

MIL-P-48366 - Propellant M30A1 For Use In Charge, Propelling Xm201E2

This specification covers M30A1 Propellant for use in the XM201E2 Propelling Charge for the 155MM Howitzers, XM198 and M109A1.

MIL-P-48367 - Propellant M30A1 For Use In Charge Propelling M203

This specification covers M30A1 Propellant produced by batch process for use in the 155MM Propelling Charge, M203 (Zone 8) for the 155MM Howitzer, M198.

MIL-P-48759 - Propellant M1 For Use In 90Mm Cartridges

This specification covers M1 Propellant for use in Cartridges, HE-T, M71A1 and TP-T, XM764 and M41 guns.

MIL-P-48760 - Primer, Stab, M56 Parts For And Loading, Assembling, And Packing

This specification covers the parts and the loading assembling and packing for one type of initiating device designated as Primer, Stab, M56.

MIL-P-50265 - Primer, Electric, Xm114 Parts For, And Loading, Assembling, And Packing

This specification covers the inspection of the parts and the loading, assembling and packing of one type of electric initiating device designated as Primer, Electric, XM114.

MIL-P-55025 - Polystyrene, Unmodified (For Use As A Binder In Explosives)

This specification covers one grade of polystyrene plastic for use as a binder for explosives. It is not intended to be used for plastic molding materials.

MIL-P-60025 - Primer, Stab, M97 Parts For

This specification covers the parts for one type of Primer designated as Primer, Stab, M97.

MIL-P-60026 - Primer, Stab, M97 Loading, Assembling And Packing

This specification contains requirements not normally required by the drawings and provides quality assurance provisions for the loading, assembling and packing for one type of initiating device designated as Primer, Stab, M97.

MIL-P-60034 - Priming Assembly Demolition, M15 Parts, Loading, Assembly And Packing

This specification contains requirements not required by the drawings and covers quality assurance requirments for the fabrication, loading, assembling and packing for one type of Priming Assembly Demolition, M15.

MIL-P-60048 - Primer, Stab, M26 Parts For (S/S By Mil-P-60049)

MIL-P-60049 - Primer, Stab M26 Parts For, Loading, Assembling And Packing

This specification covers the parts for , loading, assembling and packing for one type of primer designated as Primer, Stab, M26.

MIL-P-60050 - Primer, Stab, M72 Parts For

MIL-P-60314 - Primer, Percussion, M32, Parts For

This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M32.

MIL-P-60316 - Primer, Percussion M32 Loading, Assembling And Packing

This specification covers the loading, assembling and packing, for one type of percussion primer designated as Primer, Percussion, M32.

MIL-P-60321 - Primer, Stab, T103E1 Loading, Assembling And Packing

This specification covers the loading, assembling and packing for one type of stab primer designated as Primer, Stab T103E1.

MIL-P-60322 - Primer, Stab, T103E1 Parts For

MIL-P-60344 - Primer, Stab, M45 Parts For

MIL-P-60345 - Primer, Stab, M45 Loading, Assembly, And Packing

This specification covers the loading, assembling and packing for one type of primer designated as Primer, Stab, M45.

MIL-P-60468 - Powder, Non-Gaseous

MIL-P-60479 - Primer And Base, Igniter, Xm110, Parts For And Loading, Assembling And Packing

This specification covers the parts, loading, assembling and packing for Primer and Base, Igniter, XM110, for use with Igniter, Time, Blasting Fuze, Weatherproof, M60.

MIL-P-63198 - Primer, Stab: Pa505 Parts For, And Loading, Assembling And Packing

This specification covers the parts for, and the loading, assembling and packing for one type of primer designated as Primer, Stab: PA505.

MIL-P-63297 - Primer, Stab, Pa515

This specification contains requirements not covered by the drawings and provides quality assurance provisions for the PA515 Stab Primer.

MIL-P-70433 - Primer Percussion, Modified 209, Loading, Assembling And Packing

This specification covers quality, assurance provisions and preparation for delivery for Primer, Percussion, Modified 209, (See 6.1)

MIL-P-70475 - Paper, Nitrocellulose Base

This specification covers requirements, quality assurance provisions and packaging for the paper used to manufacture container assemblies for the propelling charges designated as M204/205 Charge, Propelling, used on the Lightweight Company Mortar System (LWCMS) and 81MM, M29A1 Mortar System.

MIL-P-70735 - Paper, Nitrocellulose Base For Artillery Propelling Charges

This specification covers requirements, quality assurance provisions and packaging for the paper used to manufacture combustible case components for the artillery propelling charge designated as M203A1 Charge, Propelling 155MM.

MIL-P-71093 - Powder, Ignition, Gasless, F-33B

This specification covers the requirements, examinations and tests for composition F-33B for the procurement of gasless, ignition powder.

MIL-P-82491 - Power Supply Mark 112 Mod 1

MIL-P-82494 - Pack Assembly, Parachute Mark 33 Mod 0

This specification establishes the requirements of one type of Parachute Pack Assembly Mark 33 Mod 0 hereafter referred to as Pack Assembly. (See 6.1 for intended use and description.)

MIL-PRF-46676 - Flexible Explosive

This specification describes performance requirements and quality assurance provisions for two grades of flexible explosive (see 6.1.1) designated as: Grade A, for Navy use (See Table I), Grade B, for Army use (See Table I).

MIL-R-10443 - Remover, Aircraft Canopy, M2 (Without Cartridge)

MIL-R-11598 - Reel, Cord, Detonating, 100 Ft

MIL-R-12744 - Relay, M1, Loading, Assembling, And Packing

This specification covers the loading, assembling and packing for one type of relay designated as Relay, M1.

MIL-R-12936 - Reel, Cord, Detonating, High-Explosive, M1

MIL-R-13738 - Rdx/Wax-97-3 (Use Mil-C-440)

MIL-R-13873 - Reel, Wire, Firing Model 1942

This specification covers Model 1942 Firing Wire Real for use in demolition purposes.

MIL-R-23688 - Release, Explosive Destructor, Mark 30 Mod 0

MIL-R-359 - Rod, Earth, Blast Driven, M13

MIL-R-46203 - Relay, Xm9 Parts For

MIL-R-46204 - Relay, Xm9 Loading, Assembling And Packing

MIL-R-46441 - Relay, M1, Parts For

This specification covers the parts for one type of relay designated as Relay, M1.

MIL-R-46442 - Relay, M2, Parts For

MIL-R-46443 - Relay, M3, Parts For

MIL-R-46444 - Relay, M4, Parts For

MIL-R-46445 - Relay, M5, Parts For

MIL-R-46446 - Relay, M6, Parts For

MIL-R-46447 - Relay M7, Parts For (S/S By Mil-R-46453)

MIL-R-46448 - Relay, M2, Loading, Assembling, And Packing.

This specification covers the loading, assembling and packing for one type of relay designated as Relay, M2.

MIL-R-46449 - Relay, M3, Loading, Assembling, And Packing.

This specification covers the loading, assembling and packing for one type of relay designated as Relay, M3.

MIL-R-46450 - Relay, M4, Loading, Assembling, And Packing

This specification covers the loading, assembling and packing for one type of relay designated as Relay,M4.

MIL-R-46451 - Relay, M5, Loading, Assembling, And Packing

This specification covers the loading, assembling and packing for one type of relay designated as Relay, M5.

MIL-R-46452 - Relay, M6, Loading, Assembling, And Packing

MIL-R-46453 - Relay, M7, Parts For Loading, Assembling And Packing

This specification covers the parts for, loading, assembling and packing for one type of relay designated as Relay, M7.

MIL-R-46903 - Relay, Explosive, Xm10 Loading, Assembling And Packing

This specification covers the Loading, Assembling and Packing for one type of explosive relay designated as Relay, Explosive, XM10.

MIL-R-46904 - Relay, Explosive, Xm10 Parts For

This specification covers the parts for one type of explosive relay designated as Relay, Explosive, XM10.

MIL-R-60443 - Relay, Explosive, Xm11

This specification covers one type of explosive relay designated as Relay, Explosive, X M11.

MIL-S-10432 - Squib, Electric, Closed

MIL-S-10641 - Squib, Electric, M1A1, Loading Assembling And Packing

MIL-S-10740 - Squib, Electrical, Flash&Vented, M1

MIL-S-14929 - Sulfur. Commercial Grade (For Use With Ammunition)

Commercial grade sulfur covered by this specification is for use in ammunition.

MIL-S-20437 - Squib, Circuit Testing, T-1

MIL-S-20575 - Squib, Igniting, Electric, T2.

MIL-S-22454 - Switch, Explosive Mark 46 Mod O

MIL-S-23117 - Sucrose Octa Acetate, Ordnance Use

MIL-S-45428 - Squid, Electric, M2, Parts For And Loading, Assembling And Packing

This specification covers the inspection of the parts and the loading, assembling and packing for one type of electrical initiation device designated as Squib, Electric, M2.

MIL-S-46422 - Screw, Explosive Release.

MIL-S-46424 - Squib And Squib Holder Assembly

MIL-S-46681 - Skid, Launching, Demolition Charge, M3 Parts And Assembly

MIL-S-46989 - Sleeve, Encasement, Nylon, Knitted

This specification covers the quality assurance requirements, and special requirements not covered by the drawings, for the processing of knitted tubular sleeving designated as Encasement Sleeves (see 6.1).

MIL-S-46997 - Squib, Electric, M3, Manufacture And Assembly,

This specification covers the manufacture and assembly of one type of electric squib.

MIL-S-71191 - Selectable Light Weight Attack Munition: M2

This specification contains the requirements and provides quality assurance provisions for the fabrication of parts and assemblies, and loading and packing of the Selectable Lightweight Attack Munition (SLAM): M2.

MIL-S-71207 - Selectable Lightweight Attack Munition Training Kit: M299

MIL-S-81196 - Squib, Electric, Mk 7 Mod 0

MIL-S-81271 - Squib, One Ampere, No Fire

This specification covers one type of one ampere, no fire squib.

MIL-S-82487 - Switch, Squib Mark 65 Mod O

MIL-S-82488 - Switch, Squib, Encapsulated Assemblies Mark 59 Mod O

MIL-S-82489 - Switch, Driver Mark 76 Mod O

This specification establishes the requirements of one type of Switch, Driver, Mark 76 Mod 0.

MIL-S-82492 - Switch, Integrator Mark 62 Mod 2

This specification establishes the requirements of one type Integrator Switch Mark 62 Mod 2.

MIL-STD-544 - Formula For Fire Mixture Ff&12

MIL-STD-545 - Formula For Fuel Mixture I (See Notice 1 For Replacement Information)

MIL-STD-546 - Formula For Fuel Mixture Ii

MIL-STD-547 - Formula For Fuel Mixture Iii

MIL-STD-550 - Formula For Ignition Mixture I (With Binder)

MIL-STD-551 - Formula For Delay Mixture (With Binder)

MIL-STD-552 - Fuel Mixture-Iv (With Binder)

MIL-STD-553 - Formula For Fuel Mixture V (With Binder)

MIL-STD-555 - Formula For Starter Mixture X

MIL-STD-557 - Formula For Starter Mixture Xii (With Binder)

MIL-STD-717 - Formula For Binder Solution Ii

MIL-STD-718 - Formula For Illuminant Composition Ii

MIL-STD-733 - Formula For Prime Composition Ii

MIL-T-12963 - Tripod, M23 For Blast Driven Earth Rod, M13

MIL-T-13391 - Torpedo, Bangalore, M1A1 Inert Assembly

This specification covers the M1A1, inert bangalore torpedo assembly for use in the training of troops.

MIL-T-13594 - Thread, Acrylic, Sewing (For Propellant Bags)

MIL-T-14019 - Tape, Computing, Demolition Charge

MIL-T-23132 - Tungsten Delay Composition

This specification covers the minimum requirements for the procurement of tungsten delay composition.

MIL-T-46682 - Thruster, Propellant Actuated, Xm24 Parts For And Loading, Assembling And Packing

This specification covers quality assurance provisions, and special requirements not covered by the drawings, for the modification of M28A2 or M29A2 3.5-inch rocket motors for use in and the loading, assembling and packing of one type of cover remover designated as the Thruster, Propellant Actuated, XM24.

MIL-T-48320 - Transmitter Assembly For Xm122 Firing Device (Superseded See Classified Index)

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of the receiver used for the xm-122 firing device.

MIL-T-50595 - Tripod Assembly, Demolition Kit, M180, Metal Parts For And Assembly

This specification contains requirements not covered by the drawings, and provides quality assurance provisions for the fabrication of parts, assembling and packing for one type of Tripod designated as Tripod Assembly for Demolition Kit, M180.

MIL-T-60394 - Tape, Pressure-Sensitive Adhesive Film Foam, Double-Coated (For Use With Ammunition) (S/S By A-A-59341)

This specification covers a non-rigid foam coated on both sides with pressure-sensitive adhesive that is suitable for adhering two similar or dissimilar materials together. (see 6.5).

MIL-W-50928 - Warhead, For Demolition Kit, M180 Parts And Loading Assembly

This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the loading and assembly of one type of warhead designated as Warhead, For Demolition Kit, M180.

MIL-W-63071 - Warhead, For Demolition Kit, M180 Metal Parts For

This specification covers the parts assembly for one type of warhead, designated as Warhead, for Demolition Kit, M180.

MIL-W-63374 - Warhead, Inert, For Demolition Kit, Training, Xm270 Loading Assembly

This specification covers the loading assembly for one type of warhead designated as Warhead, Inert, for Demolition Kit, Training, XM270.

MIL-Z-21353 - Zirconium Hydride

This specification covers powdered zirconium hydride for use in military pyrotechnics.

MS548 - Formula For Starter Mixture (Dry)

MS560 - Formula For Primer Mixture I (With Binder)

MS561 - Formula For Fire Mixture Iii (With Binder)

MS562 - Formula For Delay Mixture Iii (With Binder)

MS563 - Formula For Ignition Mixture Ii (With Binder)

MS564 - Formula For Delay Mixture 111 (With Binder)

MS565 - Formula For First Fire Mixture Iv (With Binder)

MS566 - Formula For Starter Mixture Xv (Granulated)

MS567 - Formula For First Fire Mixture V (Ff&30)

MS568 - Formula For Matchhead Mixture 11

MS569 - Formula For Matchhead Mixture 111

MS570 - Formula For Matchhead Mixture Iv

MS585 - Formula For Matchhead Mixture V

MS592 - Formula For Starter Pellet 1 (With Binder)

MS594 - Formula For First Fire Mixture (Ff&31)

MS595 - Formula For Ejection&Ignition Mixture I

MS598 - Formula For Matchhead Mixture Vi (With Binder)

QPL-46676-14 - Flexible Explosive (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-60091 - Adhesive For Bonding Demolition Charges To Structural Surfaces (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QPL-X-C-51-4 - Caps; Blasting, Electric And Non-Electric

W-B-411 - Blasting Machine, Galvanometer, Blasting, Resistor Assembly

This specification covers various types of hand-operated generators (blasting machines) used for detonating electric blasting caps or electric squibs; one type of galvanometer used for checking the electrical blasting circuits for proper continuity; and one type resistor assembly used for testing blasting machines.

X-C-51 - Cap, Blasting, Electric And Non-Electric

X-K-001274 - Kit, Classified Document Destructor, Drum Type

>

W-C-596/121 - Connectors, Plug, Electrical, Special Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/122 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/123 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/124 - Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/125 - Connectors, Plug, Electrical, Special Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/126 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz, 3-Phase

W-C-596/127 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Locking, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/128 - Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/129 - Connector, Plug, Electrical, Special Purpose, Grounding, Locking, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/12 - Connector, Receptacle, Electrical, General Purpose, Deplex, General Grade And Hospital Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/130 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/131 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/132 - Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 4 Pole, % Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3 Phase, Y

W-C-596/133 - Connector, Plug, Electrical, Special Purpose, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/134 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/135 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Locking, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase Y

W-C-596/136 - Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/137 - Connectors, Plug, Electrical, Special Purpose, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/138 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/139 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Locking, Grounding, 4 Pole, 5 Wire, 20 Amperes, 120/208 Volts, 50/60 Hertz, 3-Phase, Y

W-C-596/13 - Connector, Plug, Electrical, General Purpose, Hospital Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/140 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/141 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/142 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/143 - Connector, Plug, Electrical, General Purpose, Cable Outlet, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/144 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/145 - Connector, Receptacle, Electrical, Special Purpose, Duplex, Hospital Grade, Isolated Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/146 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 15 Amperes, 277 Volts, 50/60 Hertz

W-C-596/147 - Connector, Male Inlet, Electrical, Specific Purpose, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By Desc Dwg 87205)

W-C-596/148 - Connector, Receptacle, Electrical, Specific Purpose, Single, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 28 Volts, Direct Current

W-C-596/149 - Connector, Plug, Electrical, Specific Purpose, Locking, Grounding, 2 Pole, 3 Wire, 30 Amperes, 28 Volts, Direct Current

W-C-596/14 - Connector, Cable Outlet, Electrical, General Purpose, Hospital Grade, Cable Connecting, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/150 - Connector, Cable Outlet, Electrical, Specific Purpose, Single Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 28 Volts, Direct Current

W-C-596/151 - Connector, Receptacle, Electrical, Specific Purpose, Single, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 120 Volts, 400 Hertz, 1 Phase

W-C-596/152 - Connector, Plug, Electrical, Specific Purpose, Locking, Grounding, 2 Pole, 3 Wire, 30 Amperes, 120 Volts, 400 Hertz, 1 Phase

W-C-596/153 - Connector, Cable Outlet, Electrical, Specific Purpose, Single, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 120 Volts, 400 Hertz, 1 Phase

W-C-596/154 - Connector, Receptacle, Electrical, Specific Purpose, Single, Locking,

Grounding, 3 Pole, 4 Wire, 30 Amperes, 120 Volts, 400 Hertz, 3 Phase

W-C-596/155 - Connector, Plug, Electrical, Specific Purpose, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 120 Volts, 400 Hertz, 3 Phase

W-C-596/156 - Connector, Cable Outlet, Electrical, Specific Purpose, Cable Connecting, Locking, Grounding, 3 Pole, 4 Wire, 30 Amperes, 120 Volts, 400 Hertz, 3 Phase

W-C-596/157 - Connector, Receptacle, Electrical, Specific Purpose, Single, Locking, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 30 Phase Y, 400 Hertz

W-C-596/158 - Connector, Plug, Electrical, Specific Purpose, Locking, Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 3 Phase Y, 400 Hertz

W-C-596/159 - Connector, Cable Outlet, Electrical, Special Purpose, Cable Connecting, Locking Grounding, 4 Pole, 5 Wire, 30 Amperes, 120/208 Volts, 3 Phase Y, 400 Hertz

W-C-596/15 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/160 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/161 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 125 Volts, 50/60 Hertz

W-C-596/162 - Connectors, Cable Outlet, Electrical, General Purpose, Cable, Grounding, 2 Pole, 3 Wire, 50 Amperes, 125 Volts, 50/60 Hertz

W-C-596/163 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 125 Volts, 50/60 Hertz

W-C-596/164 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 50 Amperes, 250 Volts, 50/60 Hertz

W-C-596/165 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 250 Volts, 50/60 Hertz

W-C-596/166 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 2 Pole, 3 Wire, 50 Amperes, 250 Volts, 50/60 Hertz

W-C-596/167 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 250 Volts, 50/60 Hertz

W-C-596/168 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/169 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/16 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/170 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/171 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/172 - Connector, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 50 Amperes, 277 Volts, 50/60 Hertz

W-C-596/173 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 277 Volts, 50/60 Hertz

W-C-596/174 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 2 Pole, 3 Wire, 50 Amperes, 277 Volts, 50/60 Hertz

W-C-596/175 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 50 Amperes, 277 Volts, 50/60 Hertz

W-C-596/176 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 30 Amperes, 277 Volts, 50/60 Hertz

W-C-596/177 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 30 Amperes, 277 Volts, 50/60 Hertz

W-C-596/178 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 2 Pole, 3 Wire, 30 Amperes, 277 Volts, 50/60 Hertz

W-C-596/179 - Connector, Receptacle, Electrical, Male Inlet, General Purpose, Grounding, 2 Pole, 3 Wire, 30 Amperes, 277 Volts, 50/60 Hertz

W-C-596/17 - Connector, Plug, Electrical, General Purpose, Grounding, General Grade, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/180 - Connector, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz

W-C-596/181 - Connector, Plug, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz

W-C-596/182 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz

W-C-596/183 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 2 Pole, 3 Wire, 20 Amperes, 277 Volts, 50/60 Hertz

W-C-596/184 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/185 - Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/186 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/187 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/188 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/189 - Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/18 - Connector, Cable Outlet, Electrical, General Purpose, General Grade, Cable Connecting, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/190 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/191 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/192 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/193 - Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/194 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/195 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/196 - Connector, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 60 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/197 - Connectors, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 60 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/198 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 60 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/199 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 60 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/19 - Connector, Receptacle, Electrical, Specific Purpose, Locking, General Grade, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz (S/S By W-C-596/81)

W-C-596/1 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By W-C-596/11)

W-C-596/200 - Connector, Receptacle, Electrical, General Purpose, Single Grounding, 3 Pole, 4 Wire, 50 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/201 - Connectors, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 50 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/202 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 50 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/203 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 50 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/204 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/205 - Connector, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/206 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/207 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 30 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/208 - Connectors, Receptacle, Electrical, General Purpose, Single, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/209 - Connectors, Plug, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/20 - Connectors, Plug, Electrical, Specific Purpose, Locking, General Grade, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/210 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/211 - Connector, Male Inlet, Electrical, General Purpose, Grounding, 3 Pole, 4 Wire, 20 Amperes, 250 Volts, 50/60 Hertz, 3-Phase

W-C-596/212 - Connector, Receptacle, Electrical, General Purpose, Duplex, Grounding, Hospital Grade, Ground Fault Circuit Interrupting, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 60 Hertz

W-C-596/21 - Connector, Plug, Electrical, Specific Purpose, Cable Outlet, Locking, General Grade,, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/22 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz (S/S By W-C-596/64 Or W-C-596/65)

W-C-596/23 - Connector, Plug, Electrical, General Purpose, General Grade, 2 Pole, 2 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/24 - Connector, Plug, Electrical, General Purpose, Cable Outlet, General Grade, 2 Pole, 2 Wire, 20 Amps, 250 Volts,50/60 Hertz (S/S By W-C-596/67)

W-C-596/25 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/26 - Connector, Plug, Electrical, General Purpose, General Grade, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/27 - Connector, Plug, Electrical, General Purpose, Cable Outlet, General Grade, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/28 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/29 - Connector, Plug, Electrical, General Purpose, General Grade, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/2 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By W-C-596/12)

W-C-596/30 - Connector, Plug, Electrical, General Purpose, Cable Outlet, General Grade, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/31 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 2 Pole, 2 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/32 - Connector, Plug, Electrical, General Purpose, General Grade, 2 Pole, 2 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/33 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 3 Pole, 3 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/34 - Connector, Plug, Electrical, General Purpose, General Grade, 3 Pole, 3 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/35 - Connector, Plug, Electrical, General Purpose, Cable Outlet, 3 Pole, 3 Wire, 30 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/36 - Connector, Receptacle, Electrical, General Purpose, Single, 3 Pole, 3 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/37 - Connector, Plug, Electrical, General Purpose, 3 Pole, 3 Wire, 50 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/38 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 4 Pole, 4 Wire, 60 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/39 - Connector, Plug, Electrical, General Purpose, General Grade, 4 Pole, 4 Wire, 60 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/3 - Connector, Plug, Electrical, General Purpose, General Grade, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/40 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade And Hospital Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz, Box Mount And Snap-In Mount

W-C-596/41 - Connector, Receptacle, Electrical, General Purpose, Single, Hospital Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/42 - Connector, Plug, Electrical, General Purpose, Grounding, Hospital Grade, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/43 - Connector, Receptacle, Electrical, Specific Purpose, Single Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/44 - Connector, Plug, Electrical, Specific, Purpose, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/45 - Connector, Plug, Electrical, Specific Purpose, Cable Outlet, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/46 - Connector, Receptacle, Electrical, Specific Purpose, Single, General Grade, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/47 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/48 - Connector, Cable Outlet, Electrical, Specific Purpose, Cable Connecting, General Grade, Locking, 3 Pole, 3 Wire, 20 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/49 - Connector, Plug, Electrical, Specific Purpose, General Grade, Midget Locking, 3 Pole, 3 Wire, 15 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/4 - Connector, Plug, Electrical, General Purpose, General Grade, Cable Outlet, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/50 - Connector, Cable Outlet, Electrical, Specific Purpose, General Grade, Midget Locking Cable Connecting, 3 Pole, 3 Wire, 15 Amperes, 125/250 Volts, 50/60 Hertz

W-C-596/51 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, 3 Pole, 3 Wire, 15 Amperes, 125 Volts, 10 Amperes, 250 Volts, 50/60 Hertz

W-C-596/52 - Connector, Plug, Electrical, General Purpose, General Grade, 3 Pole, 3 Wire, 15 Amperes, 125 Volts, 10 Amperes, 250 Volts, 50/60 Hertz

W-C-596/53 - Connector, Cable Outlet, Electrical, General Purpose, Cable Connecting, General Grade, 3 Pole, 3 Wire, 15 Amperes, 125 Volts, 10 Amperes, 250 Volts, 50/60 Hertz

W-C-596/54 - Connector, Receptacle, Electrical, Specific Purpose, Single, General Grade, Locking, 3 Pole, 3 Wire, 15 Amperes, 125 Volts, 10 Amperes, 250 Volts, 50/60 Hertz (S/S By W-C-596/120)

W-C-596/55 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, 3 Pole, 3 Wire, 15 Amperes, 125 Volts, 10 Amperes, 250 Volts, 50/60 Hertz

W-C-596/56 - Connector, Receptacle, Electrical, Specific Purpose, Single, General Grade, Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz (S/S By W-C-596/136)

W-C-596/57 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/58 - Connector, Cable Outlet, Electrical, Specific Purpose, Cable Connecting, General Grade, Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/59 - Connector, Receptacle, Electrical, Specific Purpose, Single Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/5 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/60 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/61 - Connector, Cable Outlet, Electrical, Specific Purpose, Cable Connecting, General Grade, Locking, 4 Pole, 4 Wire, 20 Amperes, 3 Phase Wye, 120/208 Volts, 50/60 Hertz

W-C-596/62 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, Grounding, 3 Pole, 4 Wire, 60 Amperes, 125/250 Volts, 50/60 Hertz (S/S By Mil-C-22992)

W-C-596/63 - Connector, Plug, Electrical, General Purpose, General Grade, Grounding, 3 Pole, 4 Wire, 60 Amperes, 125/250 Volts, 50/60 Hertz (S/S By Mil-C-22992)

W-C-596/64 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/65 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/66 - Connectors, Plug, Electrical, General Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/67 - Connector, Cable Outlet, Electrical, General Purpose, General Grade, Grounding 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/68 - Connector, Receptacle, Electrical, General Purpose, Single, General Grade, Grounding, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/69 - Connectors, Plug, Electrical, General Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/6 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade, Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By W-C-596/99)

W-C-596/70 - Connector, Cable Outlet, Electrical, General Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/71 - Connector, Receptacle, Electrical, General Purpose, Duplex, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 277 Volts Ac, 50/60 Hertz

W-C-596/72 - Connector, Receptacle, Electrical General Purpose, Single, Grounding 2Pole, 3 Wire 15 Amperes, 277 Voltz Ac (S/S By W C 596/71)

W-C-596/73 - Connectors, Plug, Electrical, General Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 277 Volts, 50/60 Hertz

W-C-596/74 - Connector, Cable Outlet, Electrical, General Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 277 Volts Ac, 50/60 Hertz

W-C-596/75 - Connector, Plug, Electrical, Midget Locking, Specific Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By Desc Dwg 87203)

W-C-596/76 - Connector, Cable Outlet, Electrical, Midget Locking, Specific Purpose, General Grade, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz (S/S By Desc Dwg 87204)

W-C-596/77 - Connector, Receptacle, Electrical, Specific Purpose, General Grade, Single, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/78 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/79 - Connector, Cable Outlet, Electrical, Specific Purpose, Single, General Grade, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/7 - Connector, Plug, Electrical, Specific Purpose, General Grade, Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/80 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 30 Amperes, 250 Volts, 50/60 Hertz

W-C-596/81 - Connector, Receptacle, Electrical, General Purpose, Single, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/82 - Connector, Plug, Electrical, Special Purpose, Grounding, Locking, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/83 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/84 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts, 50/60 Hertz

W-C-596/85 - Connector, Receptacle, Electrical, Special Purpose, Single, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/86 - Connector, Receptacle, Electrical, Special Purpose, Duplex, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/87 - Connector, Plug, Electrical, Special Purpose, Grounding, Locking, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/88 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Grounding, Locking, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/89 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 15 Amperes, 250 Volts, 50/60 Hertz

W-C-596/8 - Connector, Plug, Electrical, Specific Purpose, Cable Outlet, General Grade, Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/90 - Connector, Receptacle, Electrical, Special Purpose, Single, Grounding, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/91 - Connector, Plug, Electrical, Special Purpose, Grounding, Locking, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/92 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/93 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding 2 Pole, 3 Wire, 30 Amperes, 125 Volts, 50/60 Hertz

W-C-596/94 - Connectors, Receptacle, Electrical, Special Purpose, Single, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/95 - Connector, Plug, Electrical, Special Purpose, Grounding, Locking, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/96 - Connector, Plug, Electrical, Special Purpose, Cable Outlet, Locking, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/97 - Connector, Receptacle, Electrical, Male Inlet, Special Purpose, Locking, Grounding, 2 Pole, 3 Wire, 20 Amperes, 125 Volts, 50/60 Hertz

W-C-596/98 - Connector, Receptacle, Electrical, Special Purpose, Single, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/99 - Connector, Receptacle, Electrical, Special Purpose, Duplex, Grounding, 2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596/9 - Connector, Plug, Electrical, Specific Purpose, General Grade, Midget Locking, 2 Pole, 2 Wire, 15 Amperes, 125 Volts, 50/60 Hertz

W-C-596 - Connector, Electrical, Power, General Specification For

This specification covers electrical plugs, receptacles, and cable outlets for service from 120 to 600 volts with current ratings up to 60 amperes and a frequency rating of 50/60 hertz. It does not cover devices for use in hazardous locations as defined in the National Electrical Code. Special plugs, receptacles, and cable connectors for 400 Hz and dc applications are also included. Connectors are to be used with copper or copperclad aluminum wire only.

W-R-151 - Receptacles (Convenience-Outlets), Adapters, Attachment-Plug-Caps, Cord-Connector-Bodies, Current-Taps, Motor-Base-Plugs, And Plug-Bodies, 250-Volts (S/S By W-C-596)

range of 0 to 10,000 MHz (see 6.1 and 6.3).

MIL-DTL-3650 - Connector, Coaxial, Radio Frequency, Series Lc

This specification covers weatherproof, series LC, radio frequency, coaxial connectors having a nominal impedance of 50 ohms (see 6.1 and 6.2).

MIL-DTL-3655/10 - Connector, Shield, Electrical, Class I (Coaxial, Series Twin) Type Mx-1556/U

MIL-DTL-3655/11 - Connector, Shield, Electrical, Class I (Coaxial, Series Twin) Type Ug-106/U

MIL-DTL-3655/13 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twtnc, Jam Nut Mounted)

MIL-DTL-3655/14 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twtnc)

MIL-DTL-3655/15 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twbnc)

MIL-DTL-3655/16 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twbnc)

MIL-DTL-3655/17 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twtnc, Right Angle)

MIL-DTL-3655/1 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin) Type Ug-421B/U

MIL-DTL-3655/22 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twtnc, Bulkhead)

MIL-DTL-3655/23 - Connector, Receptacle, Electrical, Class I, (Coaxial, Series Twin, Twbnc, Bulkhead)

MIL-DTL-3655/2 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin) Type Ug-422/U

MIL-DTL-3655/3 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin) Type Ug-423B/U

MIL-DTL-3655/4 - Connector, Adapter, Electrical, Class I (Coaxial, Series Twin) Type Ug-493A/U

MIL-DTL-3655/5 - Connector, Adapter, Electrical, Class I (Coaxial, Series Twin) Type Ug-981/U

MIL-DTL-3655/6 - Connector, Receptacle, Electrical, Class Ii (Coaxial, Series Twin) Type Ug-1057/U

MIL-DTL-3655/8 - Connector, Adapter, Electrical, Class Ii (Coaxial, Series Twin) Type Ug-1059/U

MIL-DTL-3655/9 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin) Type Ug-1060A/U

MIL-DTL-3655 - Connector, Plug And Receptacle, Electrical (Coaxial, Series Twin), And Associated Fittings, General Specification For

This specification covers the general requirements for series twin, coaxial connectors and associated fittings (see 6.1).

MIL-DTL-38159 - Connectors, Electric, Ramp Power, 480/277 Volts, General Specification For

This specification covers the requirements for molded rubber male and female connectors for 480/277 volt ramp power (see 6.4.2, 6.4.4, and 6.4.9) for use in non-hazardous and hazardous (classified) locations.

MIL-DTL-38999/10 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Bayonet Coupling, (Mil-Dtl-27599, Series Ii And Mil-Dtl-38999, Series Ii)

MIL-DTL-38999/20 - Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Series Iii, Metric

MIL-DTL-38999/21 - Connectors, Electrical, Circular, Threaded, Receptacle, Box Mounting Flange, Hermetic, Hermetic Solder Contacts, Series Iii, Metric

MIL-DTL-38999/22 - Connectors, Electrical, Circular, Receptacle, Threaded, Dummy Stowage, Series Iii, Metric

MIL-DTL-38999/23 - Connectors, Electrical, Circular, Threaded, Receptacle, Jam-Nut Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric

MIL-DTL-38999/24 - Connectors, Electrical, Circular, Receptacle, Threaded, Jam-Nut Mounting, Removable Crimp Contacts, Series Iii, Metric

MIL-DTL-38999/25 - Connector, Electrical, Circular, Threaded, Receptacle, Solder Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric

MIL-DTL-38999/26 - Connectors, Electrical, Plug, Circular, Threaded, Straight, Removable Crimp Contacts, Series Iii, Metric

MIL-DTL-38999/27 - Connectors, Electrical, Circular, Threaded, Receptacle, Weld Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric

MIL-DTL-38999/28 - Connectors, Electrical, Circular, Nut, Hexagon, Connector Mounting, Series Iii And Iv, Metric

MIL-DTL-38999/29 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Series Iii, Metric

MIL-DTL-38999/30 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Sockets, Series Iii, Metric

MIL-DTL-38999/31 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Shell Size 25, Series Iii, Metric

MIL-DTL-38999/32 - Connector, Electrical Circular, Cover, Protective, Plug, Series Iii, Metric

MIL-DTL-38999/33 - Connector, Electrical Circular, Cover, Protective, Receptacle, Series Iii, Metric

MIL-DTL-38999/40 - Connectors, Electrical, Circular, Receptacle, Wall Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/41 - Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric

MIL-DTL-38999/42 - Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/43 - Connectors, Electrical, Circular, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric

MIL-DTL-38999/44 - Connectors, Electrical, Circular, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/45 - Connectors, Electrical, Circular, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric

MIL-DTL-38999/46 - Connectors, Electrical, Circular, Plug, Breech Coupling, Emi Grounding, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/47 - Connectors, Electrical, Circular, Plug, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/48 - Connectors, Electrical, Circular, Receptacle, Weld Mounting, Hermetic, Breech Coupling, Hermetic Soler Contacts, Series Iv, Metric

MIL-DTL-38999/49 - Connectors, Electrical, Circular, Receptacle, In-Line Cable, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

MIL-DTL-38999/50 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Breech Coupling, Series Iv, Metric

MIL-DTL-38999/9 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Bayonet Coupling, (Mil-Dtl-27599 Series I And Mil-Dtl-38999 Series I)

MIL-DTL-38999 - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, General Specification For

This specification covers four series of miniature, high density, bayonet, threaded, or breech coupling, circular, environment resistant, electrical connectors using removable crimp or fixed hermetic solder contacts, and are capable of operation within a temperature range of -65 degrees C to +200 degrees C (see 1.3.1d). See 6.1 for intended use and applications.

MIL-DTL-39024/10 - Jack, Tip (Test Point Type, Panel Type; Single Test Point (Threaded) Low Voltage, .080)

MIL-DTL-39024/11 - Jack, Tip, Test Point Type, Printed Wiring Type, Single Test Point, Right Angle, 2-Leg Mounting, Low Voltage, .080

MIL-DTL-39024/12 - Connector

For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business