INCH-POUND
MIL-DTL-417H
12 February 2012
SUPERSEDING
MIL-A-417G (AR)
27 February 1983
DETAIL SPECIFICATION
ADAPTER, PRIMING: M1A5
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for Adapter, Priming: MlA5.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to:
Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or e-mailed to ardecstdzn@conus.army.mil. Since contact information can
change, you may want to verify the currency of this information using ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1375
DISTRIBUTION A. Approved for public release; distribution unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business