INCH-POUND
M
IL-DTL-50523A
2 August 2011
SUPERSEDING
MIL-C-50523(AR)
8 May 1970
DETAIL SPECIFICATION
CHARGE, DEMOLITION - M112
PARTS FOR LOADING, ASSEMBLING AND PACKING
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the parts for one type of demolition charge
designated as charge, demolition - M112 parts for loading, assembling and packing.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Commander, US
Army ARDEC, Attn: RDAR-QES-E, Picatinny Arsenal, New Jersey 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 1375
DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business