MIL-DTL-46594C(AR)
4.3 Conformance Inspection.
4.3.1 Inspection lot formation. The term "inspection lot" as used in this specification is
defined as an essentially homogeneous collection of units of product from which a representative
sample is drawn and inspected to determine conformance with applicable requirements. The
sample selected shall represent only that quantity of units from which the sample was drawn and
shall not be construed to represent any prior or subsequent quantities presented for inspection.
Homogeneity shall be considered to exist provided the inspection lot has been produced by one
manufacturer in one unchanged process, in accordance with the same drawing, same drawing
revision, same specification and same specification revision and complies with the provisions for
submission of product as specified in MIL-STD-1916. Changes to the process, specification, or
drawing not affecting safety, performance, interchangeability, or storage, as determined by the
Government, shall not be deemed to alter the homogeneity of an inspection lot. All material
submitted for inspection in accordance with this specification shall comply with the homogeneity
criteria specified herein regardless of the type of sampling procedure which is being applied to
determine conformance with requirements. Lot numbering, as required, shall be in accordance
with MIL-STD-1168. Each inspection lot of loaded charge assemblies shall contain:
a. Parts from not more than one lot interfix number from one manufacturer.
b. Composition B of the same grade from one lot interfix number from one manufacturer
which contains TNT from not more than one lot interfix number from one manufacturer.
c. Composition A-3 of the same grade from one lot interfix number from one
manufacturer.
4.3.2 Examination. Unless otherwise specified in the Conformance Inspection, sampling
plans for major and minor defects shall be in accordance with MIL-STD-1916, Verification
Level IV for Major defects and Verification Level II for Minor defects.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business