MIL-DTL-17124F
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards, and handbooks form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents are those cited in the solicitation
or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-P-223
- Powder, Black
MIL-P-387
- Pentaerythrite Tetranitrate (PETN)
MIL-DTL-398 - RDX (Cyclotrimethylenetrinitramine)
MIL-C-46246 - Charge, Demolition, TNT, Block ¼ Pound, ½ Pound, and 1 Pound
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-810 - Environmental Engineering Considerations and Laboratory Tests
MIL-STD-1168 - Lot Numbering of Ammunition
MIL-STD-1916 - DOD Preferred Methods for Acceptance of Product
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings and publications. The following other
Government documents, drawings, and publications form a part of this specification to the extent
specified herein.
US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING
CENTER (ARDEC) DRAWINGS
13042072
- Cord, Detonating
(Copies of the above drawings are available from U.S. Army RDECOM-ARDEC, ATTN:
RDAR-EIS-PE, Bldg. 12, Picatinny Arsenal, NJ 07806-5000 or by email at
pica.drawing.request@conus.army.mil .)
2.3 Non-Government publications. The following documents of the exact revision listed
below form a part of this specification to the extent specified herein.
ASTM INTERNATIONAL
ASTM D4976
- Standard Specification for Polyethylene Plastics
(Copies of the above document can be obtained from the ASTM International
headquarters, 100 Barr Harbor Drive, West Conshohocken, PA 19428 or online at
www.ASTM.org .)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business