INCH-POUND
MIL-PRF-46676B (AR)
10 October 2006
SUPERSEDING
MIL-E-46676A (AR)
17 April 1964
PERFORMANCE SPECIFICATION
FLEXIBLE EXPLOSIVE
This specification is approved for use by the US Army Armament Research,
Development, and Engineering Center (ARDEC) and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification describes performance requirements and quality assurance
provisions for two grades of flexible explosive (see 6.1.1) designated as:
Grade A, for Navy use (See Table I)
Grade B, for Army use (See Table I)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in Sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document, should be addressed to, U.S. Army ARDEC, ATTN:
AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or emailed to ardec-stdzn@pica.army.mil. Since
contact information can change, you may want to verify the currency of this address information using the
ASSIST online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1375
DISRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business