MIL-PRF-46676B (AR)
Varian Bondesil C-8, 5 µm
Column: RP-8/5, 25 cm, dia. 4.6 mm
Mobile phase: 30 % CH3OH/70% H2O
Detector: UV, 220 nm
Temp: 35°C
Flow rate: 1.5 mL/min
Chart speed: 1.0 cm/min
Injection volume: 10 µL
Any of the samples failing to meet the requirement of 1.25 ± 0.25 weight percent shall be cause
for rejection. (See 6.4)
5. PACKAGING
Packaging. For acquisition purposes, the packaging requirements shall be as
5.1
specified in the contract or order (see 6.2). When packaging of materiel is to be performed by
DoD or in-house contractor personnel, these personnel need to contact the responsible packaging
activity to ascertain packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is
not mandatory.)
6.1
Intended use. The flexible explosive covered by this specification is military
unique and will be used for a variety of military demolition purposes.
6.1.1 Grades of flexible explosive. The difference between Grade A and Grade B, as
identified in TABLE I, is that Grade A specifies requirements for Detonation continuity, Shock
sensitivity, and Impact sensitivity, whereas Grade B does not.
6.2
Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification, and of all documents referenced in
Section 2
b. Color required, if other than olive drab.
c. Form (sheet width, thickness, length).
d. QPL number and date
e. Special packing and marking instructions that apply to this material can be
obtained from the Packaging Group at U.S. Army ARDEC, ATTN: AMSRD-AAR-AIL-P,
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business